Creative Lighting Solutions DEEP RECESSED COMPACT TRIMLESS INTERIOR/EXTERIOR RECESSED LED UPLIGHT The LD141DRG has been designed for exterior applications that require ultra low glare, with the lens assembly recessed 53mm into the body. Compact in size, it offers a powerful output with a large range of features. There are 2 LED engine options available. The E3 engine delivers a high output of 440lm, 12° narrow beam, and both engines are available in a wide range of colour temperatures from 2200K to 5000K. Designed with our all-glass bezel, the LD141DRG offers a seamless, super low-glare solution for a range of exterior-rated applications. KEY FEATURES DIMENSIONS Dimensions in mm > Deep recessed uplight with optics set back 53mm into the body for super low glare > High-power E3 engine with NICHIA LED delivering up to 4401m at 500mA > Available in a wide range of colour temperatures from 2200K to 5000K. > Durable all glass bezel, suitable for a wide range of applications > Range of beam angles including 12°, 19°, 25° > Optional half moon glare shield for further glare reduction > Fixing options include a rebated trimless fixing sleeve, concrete housing and ground tube Contains our integral moisture guard (anti-wicking barrier), stopping water ingress from going up the cable into the product from incorrect IP-rated connections > Switched, 0-10V, Casambi, DMX, DALI or Mains dimmable drivers available For fixing dimensions please go to page 3. Page 1 of 6 | Data sheet issued: 18 June 2025

Lighl-Graphix Creative Lighting Solutions WHITE LED ENGINE SPECIFICATION Page 2 of 6 | Data sheet issued: 18 June 2025

LD141DRG DIMENSIONS AND FIXING ACCESSORIES imless fixing sleeve and O-Ring /441SG /441GTG Trimless ground tube fixing /441GTG Trimless ground tube fixing Rebated trimless fixing sleeve The in-ground tube has been designed for applications where a recessed uplight is required The fitting can be supplied with a rebated fixing sleeve. This is bonded into the mounting in soil or gravel surfaces. The tube can be buried with the necessary wiring, and then the surface first. The LD141DRG is secured into the sleeve by a single ‘O’ ring on the body. When fitting installed after the landscaping work has...

Creative Lighting Solutions /HT-44-G Trimless Family Hand tool We supply our Trimless family fittings with a hand tool for easy intallation and removal. Use the /HT-44-G suction cup or a similar suction tool for the removal of the fittings from their fixing options. Please contact your LightGraphix sales representative for more information. Press tool firmly onto glass. [3 Tilt handle up to create suction, and pull directly upwards to remove fitting. Note: Do not twist during removal as this could damage the bezel. Page 4 of 6 | Data sheet issued: 18 June 2025

LD141DRG GLARE CONTROL OPTIONS /NGS No glare shield. Deep recessed optic and matt black anodised optic holder aids in glare reduction. /GSHM For applications that require low glare. Lumen output is typically reduced by 60% with no light lost on the lit surface. Distance Luminance Distance (m) (m)Luminance (lx) (lx) Distance Luminance (lx) (m) Distance Luminance (lx) (m) Distance Distance Luminance (lx) (m) Distance Distance (m)Luminance Luminance (lx) (m) Distance (m) (m) (lx) Distance (m) (m)Luminance (lx)Distance (m) (m) (lx) (m) (lx) (lx) Luminance (lx)Luminance Distance Luminance Distance...

Creative Lighting Solutions ORDER CODES & OPTIONS EXAMPLE: LD141DRG-E3-500 / LW30 / NB / GSHM / 441SG / PAINT FINISH BLACK Light Engine & Drive Current LED Colour Beam Angle Glare shield Fixing Fixing Finish Passivated Stainless Steel Use with 350mA and 500mA constant current LED drivers We have a range of dimmable LED drivers including DMX and DALI compatible. Please see the downloads section on our website. Page 6 of 6 | Data sheet issued: 18 June 2025