LD141DRG
6Pages

LD141DRG DEEP RECESSED COMPACT TRIMLESS INTERIOR/EXTERIOR RECESSED LED UPLIGHT The LD141DRG has been designed for exterior applications that require ultra low glare, with the lens assembly recessed 53mm into the body. Compact in size, it offers a powerful output with a large range of features. There are 2 LED engine options available. The E3 engine delivers a high output of 440lm and 12° narrow beam, whilst the F1 engine offers a super warm colour temperature of 2200K. Designed with our all-glass bezel, the LD141DRG offers a seamless, super lowglare solution for a range of exterior-rated applications. Deep recessed uplight with optics set back 53mm into the body for super low glare For fixing dimensions please go to page 3. High-power E3 engine with NICHIA LED delivering up to 440lm at 500mA F1 LED engine with CREE COB with super warm 2200K option Durable all glass bezel, suitable for a wide range of applications Range of beam angles including 12°, 19°, 25° Optional half moon glare shield for further glare reduction Fixing options include a rebated trimless fixing sleeve, concrete housing and ground tube Repairable light engine with anti-wicking barrier to increase protection against moisture ingress Switched, 0-10V, Casambi, DMX, DALI or Mains dimmable drivers available T: +44 (0)1322 527 629 E: light@lightgraphix.co.uk Data sheet issued: Nov 2022 | Issue 1

LD141DRG WHITE LED ENGINE SPECIFICATION Engine Beam angles Colour temperature* Lumens per circuit watt Colour consistency Peak intensity Applications This data is based on LD141DRG-E3-500-NB and LD141DRG-F1-500/MSB/LW30 *Lumen output data applies to all E3 colour temperatures, for F1, please see lumen variance table to the right **Indicates the nominal power for the LED run at that aprticular current and includes losses associated with using an 85% efficient driver ***UGR values based on room parameter of 4H 8H, C70 W50 F20 MECHANICAL Ambient temperature 6mm toughened glass with ceramic...

LD141DRG DIMENSIONS AND FIXING ACCESSORIES imless fixing sleeve and O-Ring /441SG /441GTG Trimless ground tube fixing /441GTG Trimless ground tube fixing Rebated trimless fixing sleeve The in-ground tube has been designed for applications where a recessed uplight is required The fitting can be supplied with a rebated fixing sleeve. This is bonded into the mounting in soil or gravel surfaces. The tube can be buried with the necessary wiring, and then the surface first. The LD141DRG is secured into the sleeve by a single ‘O’ ring on the body. When fitting installed after the landscaping work...

LD141DRG /HT-44-G Trimless Family Hand tool We supply our Trimless family fittings with a hand tool for easy intallation and removal. Use the /HT-44-G suction cup or a similar suction tool for the removal of the fittings from their fixing options. Please contact your LightGraphix sales representative for more information. Press tool firmly onto glass. Tilt handle up to create suction, and pull directly upwards to remove fitting. Note: Do not twist during removal as this could damage the bezel. T: +44 (0)1322 527 629 E: light@lightgraphix.co.uk Data sheet issued: 24 October 2023 4:05 pm |...

LD141DRG GLARE CONTROL OPTIONS /NGS No glare shield. Deep recessed optic and matt black anodised optic holder aids in glare reduction. /GSHM For applications that require low glare. Lumen output is typically reduced by 60% with no light lost on the lit surface. 89 103 Distance Luminance Distance (m) (m)Luminance (lx) (lx) Distance Luminance (lx) (m) Distance Luminance (lx) (m) Distance Distance Luminance (lx) (m) Distance Distance (m)Luminance Luminance (lx) (m) Distance (m) (m) (lx) Distance (m) (m)Luminance (lx)Distance (m) (m) (lx) (m) (lx) (lx) Luminance (lx)Luminance Distance Luminance...

LD141DRG ORDER CODES & OPTIONS Light Engine & Drive Current Example: LD141DRG-E3-500 / LW30 / NB / GSHM / 441SG / Paint finish black LED Colour Glare shield Beam Angle / Fixing Finish / Extra Warm White (2700K) Passivated Stainless Steel Paint finish Black (Powder Coat) Super Warm White (2200K) Extra Warm White (2700K) Drivers Use with 350mA and 500mA constant current LED drivers We have a range of dimmable LED drivers including DMX and DALI compatible. Please see the downloads section on our website. T: +44 (0)1322 527 629 E: light@lightgraphix.co.uk Data sheet issued: Nov 2022 | Issue 1