LD1082 FIXED HIGH-POWER SHALLOW RECESSED LOW GLARE LED DOWNLIGHT The LD1082 is part of a range of ultra shallow, high power downlights designed to fit into ceilings with a minimal recess depth. With two engine options, this compact, high quality downlight can deliver over 900lm making it ideal for general downlighting, as well as wall washing and architectural applications. A matt black internal baffle helps to reduce glare and can be custom painted to suit the design scheme. Rated IP40 as standard, LD1082 can also be specified as IP65 for wet or humid areas including bathrooms and spas. With a minimalistic design it complements most interior project styles that require a high-power light output, from a very compact, shallow fitting. High-power N1 engine with CREE COB delivering 905lm in 3000K at 700mA For full dimensions please go to page 3 E3 engine featuring NICHIA LED delivering over 697lm in 3000K at 700mA Designed for shallow applications with a minimal recess depth of 70mm High quality, machined, anodised aluminium bezel available in a wide range of paint finishes including: White (RAL 9016), Black (RAL 9005), Silver Anodised, Antique Bronze, Satin Brass, Satin Antique Brass, Anthracite Grey (RAL 7016) or any RAL finish. Matt black baffle low glare inner baffle and deep recessed LED with optional honeycomb louvre available Single optic produces a very consistent beam with no multiple shadows 9 beam angle choices, including 12° narrow and 12° x 49° oval beam (E3 engine) Rated IP40 with IP65 option for wet areas such as bathrooms and spas Simple spring clip fixing method, suitable for surfaces 1mm-23mm thick Switched, 0-10V, Casambi, DMX, Dali or Mains dimmable drivers available T: +44 (0)1322 527 629 E: [email protected] Page 1 of 6 | Data sheet issued: 20 May 2025

Creative Lighting Solutions Page 2 of 6 | Data sheet issued: 20 May 2025

Please refer to our finishes guide for full details The LD1082 bezel is machined from aluminium and painted in-house at LightGraphix. Wet spray paint finishes are suitable for interior, exterior and high saline marine environments. Our standard colours are below but we can accommodate any RAL request. SILVER ANODISED ANTIQUE BRONZE SATIN ANTIQUE BRASS SATIN BRASS s, such as wings. tents, as les tosuch scale. cables to scale. drawing. DIMENSIONS AND FIXING OPTIONS Supplied as standard with spring clips, which are suitable for use in surfaces with a thickness of 1mm – 23mm. Spring clips provide...

CEILING VOID REQUIREMENTS Installation requirements can vary but the minimum installation volume requirements must be adhered to. The volume of air within the void ensures that the thermal performance of the product is not compromised and that proper cooling of the LED can take place. The minimum void height is 50mm. E3 LED Output current Minimum void dimension requirements (Lmm x Wmm x Hmm) Minimum void volume cm³ Output current Minimum void dimension requirements (Lmm x Wmm x Hmm) Minimum void volume Note: At 700mA the minimum dimension between a wall, within the ceiling void and the edge of...

LD1082 CONE DIAGRAMS N1 LED Engine Cone diagrams below are based on a 3000K N1 LED engine run at maximum output 700mA, 14W. Images below represent beam outputs when wall washing a 3m wall, spaced 125mm away from the lit surface. Photometric files (LDT) are included in the design pack which can be downloaded from the LD1082 product page on the website. /MSB Distance (m) (lx) Distance (m) Distance (m) (lx) Distance (m) (lx) Distance (m) (lx) Distance Distance (m) Distance (m) Luminance (m)Luminance (lx) Luminance (lx)Luminance (lx) (m) istance Distance (m) Luminance (m)Luminance (lx) Luminance...

LD1082 ORDER CODES & OPTIONS Light engine & drive current Example: LD1082-E3-500 / LW30 / MB / IP65 / White / HL LED colour Beam angle / Super Warm White (2200K) Extra Warm White (2700K) Paint Finish White (RAL 9016) /OB Paint Finish Black (RAL 9005) Super Warm White (2200K) Extra Warm White (2700K) Paint Finish Silver Anodised Paint Finish Antique Bronze Paint Finish Satin Antique Brass Paint Finish Satin Brass Paint Finish Anthracite Grey (RAL 7016) Drivers Use with 350mA, 500mA & 700mA constant current LED drivers We have a range of dimmable LED drivers DMX and DALI compatible. Please see...