LD1080
6Pages

LD1080 FIXED HIGH-POWER SHALLOW RECESSED LOW GLARE LED DOWNLIGHT The LD1080 is part of a range of ultra shallow, high power downlights designed to fit into ceilings with a minimal recess depth. This compact, high quality downlight is available with two powerful LED engines options delivering in excess of 1000lm, making it ideal for general downlighting, as well as wall washing and architectural applications. Rated IP40 as standard, the LD1080 can also be specified as IP65 for wet or humid areas including bathrooms and spas. With a minimalistic design it complements most interior project styles that require a high-power light output, from a very compact, shallow fitting. High-power N1 CREE COB engine delivering up to 1006lm in 3000K at 700mA For full dimensions please go to page 3 E3 engine featuring NICHIA LED delivering over 703lm in 3000K at 700mA Designed for shallow applications with a minimal recess depth of 70mm High quality, machined, anodised aluminium bezel and body available in a wide range of paint finishes including: White (RAL 9016), Black (RAL 9005), Silver Anodised, Antique Bronze, Satin Brass, Satin Antique Brass, Anthracite Grey (RAL 7016) or any RAL finish. Deep recessed LED and optic and optional honeycomb louvre for low glare Single optic produces a very consistent beam with no multiple shadows 9 beam angle choices, including 12° narrow and 12° x 49° oval beam (E3 engine) Rated IP40 with IP65 option for wet areas such as bathrooms and spas Simple spring clip fixing method, suitable for surfaces 1mm-23mm thick Switched, 0-10V, Casambi, DMX, Dali or Mains dimmable drivers available T: +44 (0)1322 527 629 E: light@lightgraphix.co.uk Data sheet issued: 22 February 2023 11:02 am | Issue 1

PRODLD1080 CODE WHITE LED ENGINE SPECIFICATION Engine Beam angles Colour temperature* Lumens per circuit watt Colour consistency Peak intensity Applications These values are based around a LD1080-E3-700-LW30-NB & LD1080-N1-700-LW30-MSB *see lumen variance table to the right for N1 engine. E3 lumens apply across all colour temperatures **indicates the nominal power for the LED run at that particular current and includes losses associated with using an 85% efficient driver ***UGR values based on room parameter of 4H, 8H, C70 W50 F20 MECHANICAL Ambient temperature IP65 version uses a 1mm thick...

Please refer to our finishes guide for full details The LD1080 bezel is machined from aluminium and painted in-house at LightGraphix. Wet spray paint finishes are suitable for interior, exterior and high saline marine environments. Our standard colours are below but we can accommodate any RAL request. SILVER ANODISED ANTIQUE BRONZE SATIN ANTIQUE BRASS SATIN BRASS tents, such as cables to scale. ify drawing. DIMENSIONS AND FIXING OPTIONS Supplied as standard with spring clips, which are suitable for use in surfaces with a thickness of 1mm – 23mm. Spring clips provide a simple, single fix...

CEILING VOID REQUIREMENTS Installation requirements can vary but the minimum installation volume requirements must be adhered to. The volume of air within the void ensures that the thermal performance of the product is not compromised and that proper cooling of the LED can take place. The minimum void height is 70mm. E3 LED Output current Minimum void dimension requirements (Lmm x Wmm x Hmm) Minimum void volume cm³ Output current Minimum void dimension requirements (Lmm x Wmm x Hmm) Minimum void volume Note: At 700mA the minimum dimension between a wall, within the ceiling void and the edge...

LD1080 CONE DIAGRAMS N1 LED Engine Cone diagrams below are based on a 3000K N1 LED engine run at maximum output 700mA, 14W. Images below represent beam outputs when wall washing a 3m wall, spaced 125mm away from the lit surface. Photometric files (LDT) are included in the design pack which can be downloaded from the LD1080 product page on the website. /MSB Distance (m) (lx) Distance (m) Distance (m) (lx) Distance (m) (lx) Distance (m) (lx) Distance Distance (m) Distance (m) Luminance (m)Luminance (lx) Luminance (lx)Luminance (lx) (m) istance Distance (m) Luminance (m)Luminance (lx)...

LD1080 ORDER CODES & OPTIONS Light engine & drive current Example: LD1080-E3-500 / LW30 / MB / IP65 / White / HL LED colour Beam angle / Extra Warm White (2700K) Paint Finish White (RAL 9016) /OB Paint Finish Black (RAL 9005) Super Warm White (2200K) Extra Warm White (2700K) Paint Finish Silver Anodised Paint Finish Antique Bronze Paint Finish Satin Antique Brass Paint Finish Satin Brass Paint Finish Anthracite Grey (RAL 7016) Drivers Use with 350mA, 500mA & 700mA constant current LED drivers We have a range of dimmable LED drivers DMX and DALI compatible. Please see the downloads section...