LD Line 15
3Pages

Miniature Low Profile 24V Linear Line of Light Data sheet - Page 1 LD Line 15 is an incredibly shallow line of light. It has been designed for indirect applications that require no spotting of LEDs. With a depth of only 15mm, it is ideal for shelves as shallow as 30mm and lighting polished/reflective surfaces. LightGraphix worked very closely with BWF in Germany to create a new polycarbonate extrusion based on their colourLED® technology. The special formulation, coupled with the built in reflector, resulted in a product that achieves no spotting from the LEDs whilst achieving minimal efficiency losses. - Very shallow 15mm depth - No spotting of LEDs - Built in reflector - Extruded polycarbonate ColourLED® technology with increased light transmission over conventional opal diffusers - Range of fixing options depending on the detail - Rigid profile 1:1 Scale for - Very cost effective solution when IP40/44 is not enough, and the alternative is CAD Download an expensive IP68 rated product - Lengths are custom made toLDsuit to 15 a maximum of 4013mm**, so no dark spots! Line 50,000hrs (to 70% lumen output) 45°C Anodised aluminium, polycarbonate colourLED® profile polycarbonate end caps 2m (can be specified with up to 10m at extra17cost) IP54 (IP67 option) * Shipping and practicalities of installation need to be considered when specifying long lengths 17.5 LD Line 15 /SC Spring clip 18 Data sheet issued: 24 September 2021 LightGraphix reserve the right to change specifications without notice Max ambient temperature DIM Materials 15 15 15 15 - Available with Switched, 1-10V, DMX or Dali drivers - IP67 rated version for wet environments - Very minimal 1mm thick end caps cale or for wnload Download Dimensions Short pitch tape Colour Temperature

Miniature Low Profile 24V Linear Line of Light LD Line 15 /SC Spring clip 15 - Stainless steel fixing clips are LD Line 15 ideal for exterior environments. /SC Spring clip 15 For example under steps or around water features - 3M adhesive 18 tape is suitable for most applications and will provide a very good bond to metal, wood and painted surfaces. 1mm 13 DIM allows for any bumps thickness in LD theLine mounting surface. Ideal for 15 with Double-sided routed grooves where the fitting tape needs to sit flush. Indoor only applications. LD Line 15 with Double-sided tape 15 15 LD Line 15 /SC...

Miniature Low Profile 24V Linear Line of Light Data sheet - Page 3 IP67 rated /IP67 - LD Line 15 can be supplied as IP67. This can very useful for lighting the edges of ponds or water features, where the LED can be seen in the reflection of the water. No spotting when used over reflective water surfaces To achieve an IP67 rating, resin is used to seal each end of the product. This produces a 15mm break between the end of the product and the LED. The result LD Lineis15a slightly less bright zone at each end. /IP67 To achieve an IP67 rating, resin is used to fill seal each end of the product....