CBG FirePan 50/90TDS No. 7200 Fire-resistant composite sandwich core panel on basalt and ceramic basis for the production of fire-resistant constructions in the sphere of building construction and container construction, as well as comparable application ✓ vibration damping ✓ non-flammable ✓ no smouldering ✓ recyclable ✓ 100% of natural origin, chemically neutral ✓ antibacterial ✓ corrosion resistant ✓ heat resistant ✓ water repellent Delivery * - Various sizes and surfaces are possible on request ✓ Delivery on pallets wrapped with stretch film ✓ incl. connecting strip Processing and storage ✓ The panel is ready for installation and requires no further processing ✓ Excellent mechanical properties of the panel allow to use screw and dowel-screw fasteners, both on flat and angle connections ✓ Workable with ordinary cutting/grinding tool ✓ The usual protective measures must be taken during processing. Gloves, respiratory protection and safety glasses are recommended. Please note the instructions for use "Handling mineral wool and insulation materials (glass wool, rock wool)" from BG Bau. ✓ Horizontal storage, e.g. on pallets, on a level surface, secure against slipping The technical information on our products reflects the state of our knowledge at the time of printing. Therefore, the latest edition of the data sheet should always be used, as our experience and knowledge are constantly evolving. In case of doubt please contact us. The application shown is only exemplary and may vary in individual cases. It is therefore not relevant for liability. Our general terms and conditions apply, which can also be found on o