Data transmission and tracking system for crawler cranes, duty cycle crawler cranes and deep foundation machines

LiDAT® LiDAT® is a data transmission and positioning system for Liebherr machines and the machines of other manufacturers. Based on state-of-the-art data transmission technology, LiDAT® provides information on the location and operation of your machines, enabling their efficient management, optimal operation scheduling and remote supervision. With LiDAT® all the most important machine data can be viewed at all times. Data are updated several times a day and can be accessed using a web browser. Particularly important informat­ ion, such as when a machine leaves a predefined zone or notifications...

Maintenance Restrict Ions Reports VVebParts mode: View Recently viewed reports Machine use Fuel consumption Service maintenance planner Machine logbook Machine details Overview of the fleet bell machine* Transfer machines Register I lehhrrr machine Register non l tabherr machine Machine groups Machine type* fleet Modem management Software update Release Notes htap data ®2D16 Gwodaaw OEriKG Googh TapmOlUM Rapcrtamap. Specific type Crawler clanes fuel consumption Ceo-Trqck Machine details Machine list Machine logbook Mairjr.e use Maachinennut/uiig Neci ialsix racm Service maintenance planner Actions...

Controlling the machine position and machine operation: • accurate documentation of the machine position • provision of a warning message if a machine leaves the predefined zone or operates outside the given time frame • useful for planning: transport, refuelling, service jobs, etc. Information about machine position Defined area in which the machine may be situated Information about machine position

Machine report: machine use is transparent ► thus less idle time and reduction in fuel consumption and operating hours ► increase in resale value and decrease in the running costs combination of machine use and fuel consumption ► thus conclusive analyses are possible through coloured marking different modes of operation are apparent list of the changes in mode of operation throughout one day (idle time, working time, driving, operating mode, etc.) ► inefficient working periods can thus be recognized at a glance Overview of the changes in operating mode

Fuel report: • trend analyses for optimization, operator training, machine comparisons and site comparisons • display of the actual tank level ► refuel planning • presentation of average fuel consumption or consumption over a certain period ► developments requiring explanation can be detected Operation monitoring1: • display of the machine monitors in the LiDAT portal in real time • support for the machine operator in case of queries and adjustments • control of the machine parameters wherever they are ► e.g. for safety-critical operations Fuel consumption Uebherr-Werit Nenzmg GmbH available...

• direct communication between the machine operator and the LiDAT portal • sending of working information • notification of work delays (e.g. delays in deliveries) • status overview, whether notification has been sent, delivered or read available for selected machines

Teleservice: Liebherr service engineer can log directly on the machine in order to rectify faults: • reduction in the downtime of the machine • troubleshooting without the Liebherr service engineer having to travel • lower service costs • shorter fault analysis and correction times • call up of information about the machine status • configuration of the machine by the service engineer from the office • transmission of data

Additional package: Safety Package (LR, HS): Safety report: • overview of safety-relevant information • documentation of overloads, violation of wind speeds, etc. • LML overview of sensor warnings, LML assembly operation, etc. Notification Iml utilization Iml utilization Iml utilization Iml utilization Iml utilization Iml utilization Iml utilization Iml utilization less than 110%, maximum utilization: 118,3% higher than 110% less than 110%, maximum utilization: 113,6% higher than 110% less than 110%, maximum utilization: 119.6% higher than 110% less than 110%, maximum utilization: 117.2% higher...

cycle crawler cranes (LWN) Notification assembly operation off, set assembly operation: load on main boom: 0.4to, load on luffing Jib: O.Oto assembly operation on assembly operation off, set assembly operation: load on main boom: 0.4to, load on luffing jib: O.Oto assembly operation on assembly operation on assembly operation off, set assembly operation: load on main boom: 0.4to, load on luffing jib: O.Oto assembly operation on assembly operation off, set assembly operation: load on main boom: 0.4to, load on luffing jib: O.Oto assembly operation off, set assembly operation: load on main boom:...

Additional package: PDE Data Transmission (HS, LRB, LRH, LB): • process data recorded by PDE is transmitted via LiDAT to the reporting software PDR (Process Data Report) • easy handling of the data transmission • no travelling to the machine • central data management and archiving • data can be transmitted without interrupting the operation of the machine pile number pilenumber 10% 10% CompactFlash memmory Card 4.5 m 4.5 m PDE®- colour monitor for visualisazion of the PDE data in the operator‘s cab Process data reporting software PDR Standard for the PDE® Package Optional addition to the PDE®...

Additional package: Web Service (LR, HS, LRB, LRH, LB): • direct integration in an ERP system capable of web service • automatic supplement of existing business processes with machine data • AEMP ready * dependent on control system ** on average 11 transmissions per day We are able to offer training on site, in Liebherr-Werk Nenzing or via screen sharing. Please contact us at the indicated address. LiDAT requires a standard browser with broadband Internet connection. For optimum presentation, we recommend a minimum resolution of 1280 x 720 pixels.