1. Catalogs
  2. Liebherr-International Deutschland
  3. Rubber Tyre Gantry Crane (RTG) technical description
video corpo

Rubber Tyre Gantry Crane (RTG) technical description

Rubber Tyre Gantry Crane (RTG) technical description

Rubber Tyre Gantry Crane (RTG) technical description

Product catalog summary
Overview
The document provides a technical description of the Liebherr Rubber Tyre Gantry Crane (RTG), detailing its dimensions, travel system, lifting capacity, and power specifications.

Dimensions and Design Parameters
  • RTG Model Range: Includes models with AC Drive, 4 wheels per corner, capable of stacking 1 over 5 high, and accommodating 7 containers wide plus a truck lane.
  • Classification: F.E.M. U7-Q2-A7 (Singlelift).
  • Wind Speed: In-service wind speed is 72 km/h, and out-of-service wind speed is 150 km/h.
  • Maximum Yard Slope: 1:100 in either direction.
  • Self Weight: Ranges from 116t to 138t depending on the model.
  • Gantry Span: Varies from 20.8m to 26.5m depending on the width.
  • Lifting Heights: Ranges from 12.3m to 21.0m depending on the stacking configuration.

Gantry Travel System
  • Features the Liebherr Anti-Sway System with eight rope reeving, minimizing spreader positioning times and enhancing productivity by 30-40%.
  • Direct driven, no chain drive, with hydraulically locked wheels.
  • Motors: 4 motors on 16 wheeler and 2 motors on 8 wheeler, reducing tyre wear.

Lifting Capacity and Working Speeds
  • Single Lift Capacity: 40.6t to 50t.
  • Twin Lift Capacity (optional): 50t to 65t.
  • Hoisting Speeds: 56m/min with no load, 28m/min with rated load.
  • Trolley and Gantry Travel Speeds: Up to 130m/min without load and 70m/min with rated load.

Power and Drive System
  • Power Rating: 405kW with engine options from Scania, Cummins, or Volvo.
  • Alternator Type: Marelli or Stamford.
  • Fuel Tank Capacity: 1000l to 1500l.
  • Operating Voltage/Frequency: 480V/60Hz.
  • Generator Set Rating: 400kVA continuous.
  • Drive System: Includes hoist, trolley, and gantry travel units with specific kW ratings.

Additional Features
  • Liebherr Reeving System for sway prevention.
  • Electrical and/or hydraulic steering options.
  • Robust structure optimized for automation with optional DGPS auto steering.
  • Comprehensive service network and training provided by Liebherr.
See more

Catalog excerpts

Rubber Tyre Gantry Crane (RTG) technical description-1

Technical Description Liebherr Rubber Tyre Gantry Crane (RTG)

 Open the catalog to page 1
Rubber Tyre Gantry Crane (RTG) technical description-2

RTG Model Designation (example) 7 / 5 / 4 / WS AC Drive 4 wheels per corner 1 over 5 high stacking 7 containers wide + truck lane RTG Model Range* A Typical Gantry Span C Travel Wheel Gauge D Equaliser Length E Length over travel guards F Trolley travel G Trolley end approach H Trolley end approach 20.8m for 5 wide + truck lane 23.6m for 6 wide + truck lane 26.5m for 7 wide + truck lane 12.3m for 1 over 3 15.2m for 1 over 4 18.1m for 1 over 5 21.0m for 1 over 6 9.2m 2.5m 13.3m for 4 wheels per corner 13.7m for 2 wheels per corner Gantry span minus end approach 2.40m 2.25m * other features and...

 Open the catalog to page 2
Rubber Tyre Gantry Crane (RTG) technical description-3

Liebherr Anti - Sway System Eight Rope Reeving Minimal spreader positioning times Anti - Sway: Trolley & Travel direction Anti - Skew Trim and Skew spreader positioning No Additional Ropes or Devices necessary No head block - Reduced rope load and tare weight Lower energy consumption All Electrical Spreader - Less maintenance Increase in Productivity of between 30 - 40% when compared to alternative designs. Gantry Travel System Features Direct Driven, No Chain Drive Gantry travel with load Wheels hydraulically locked Motors 4 motors on 16 wheeler Reduced tyre wear with differential axles allowing...

 Open the catalog to page 3
Rubber Tyre Gantry Crane (RTG) technical description-4

Liebherr Rubber Tyre Gantry Crane Liebherr Reeving System: Sway Prevention, NOT Sway Correction Electrical (Gantry Align) Steering and/or Active Hydraulic Steering Rigid Robust Structure - Optimum for Automation (i.e. Structural, Mechanical and Electrical Design, Production, Commissioning and Service) Lifting Capacity Single Lift Twin Lift (optional) Working Speeds * Hoisting with No Load Hoisting with Rated Load Trolley Travel (with & without load) Gantry Travel (without load) Gantry Travel (with rated load) Stack Transfer (without load) * Alternative Speeds Also Available Wheel Dimensions &...

 Open the catalog to page 4

All Liebherr-International Deutschland catalogs and brochures

  1. LRS 545

    5  Pages

  2. LPS 420 E

    5  Pages

  3. Scrap Handling

    24  Pages

  4. LH 22 Industry

    40  Pages

  5. HS 8300 HD

    16  Pages

  6. HS895

    16  Pages

  7. LH 110 Port

    20  Pages

  8. LH 110 Industry

    22  Pages

  9. LH 60 M

    20  Pages

  10. LH 40/LH 50

    44  Pages

  11. LRS 645 LH

    4  Pages

  12. R 984 C

    10  Pages

  13. LH 120 M

    12  Pages

  14. LH 80 M

    16  Pages

  15. A 954 C HD

    28  Pages

  16. RTG

    2  Pages

  17. RMG

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.