Technical Description Rail Mounted Gantry Cranes

Advantages of RMG for Yard Stacking RMG Model Designation S190 L (MT) / (RT) Rotating machinery trolley (optional) Machinery trolley Lattice structure for main beam Hoist motor size • Suitable for both port and rail terminals. • Suitable for various yard space conditions. • Increased yard capacity with wider and higher stack possibilities. • Reduction in emissions and noise. Classification according to F.E.M. U7-Q2-A7 (Single lift) In service wind speed 72 km/h (20 m/s) Out of service wind speed 151.2 km/h (42 m/s) Ambient temperature range -45°C to + 45°C Hoisting with no load 56...

Liebherr Anti-Sway System (Eight Rope Reeving) Advantages by Design • Minimal spreader positioning times. • Lower energy consumption. • No-sway in hoist, trolley and travel directions. • All electric spreader - Less maintenance. • Significant increase in productivity when compared with alternative designs. • No additional ropes or devices necessary. • No head block - Reduced rope load and tare weight. Motors and Speed Control System Motors / Suppliers • All drives are sized for maximum torque and power requirements, guaranteeing extended lifetime. • All major components are sourced from reputable...

Liebherr Rail Mounted Gantry Crane • Liebherr reeving system: Sway prevention, not sway correction. • Regeneration during lowering of load and drive deceleration, results in overall reduction in power consumption. • Electric (gantry align) steering. • Rigid robust structure - Optimum for automation. Optional DGPS auto steering and container positioning. • Direct gearbox driven travel systems. • Separate drives for hoist, travel and trolley, with no need for side shift on the spreader. Allows superior fine positioning with simultaneous motion. • Worldwide Liebherr service network. • Extensive...