LH 80 M
16Pages

Catalog excerpts

Industrial Applications Operating Weight: 167,990 – 172,180 lb Engine Output (SAE J1349): 308 HP / 230 kW Engine Output (ISO 9249): 313 HP / 230 kW

Open the catalog to page 1

Technical Data Engine Swing Drive Rating per SAE J1349 308 HP (230 kW) at 1,700 rpm Rating per ISO 9249 313 HP (230 kW) at 1,700 rpm Model Liebherr D936 according to level 6 cylinder in-line Type Bore/Stroke 4.8/5.9 in Displacement 640 in3 4-stroke diesel Engine operation Common-Rail turbo-charged and after-cooled reduced emissions Cooling water-cooled with integrated motor oil cooler Air cleaner dry-type air cleaner with pre-cleaner, primary and safety elements Fuel tank 240 gal Engine idling sensor controlled Electrical system Voltage 24 V 2 x 170 Ah/12 V Batteries three phase current 28...

Open the catalog to page 2

A A1 B B1 C D E H K L M Q T1 T4 U4 Z E = Tail radius Tires 23.5-25 Industrial-Type Straight Mono Boom 34’5” and Industrial Stick ft in 25’ 7” V ft in 28’ 1” W ft in 13’ 5” X ft in 49’ 8” Industrial-Type Straight Mono Boom 37’9” and Industrial Stick ft in 29’ 6” V ft in 27’ 3” W ft in 13’ 9” X ft in 53’ Industrial-Type Angled Mono Boom 37’9” and Industrial Stick ft in 29’ 6” V ft in 27’ 1” W ft in 17’ 5” X ft in 53’ Industrial-Type Straight Mono Boom 41’ and Industrial Stick ft in 29’ 6” V ft in 29’10” W ft in 12’ 8” X ft in 56’ 1” LH 80 M Litronic Machine for Industrial...

Open the catalog to page 3

Industrial Attachment with Industrial-Type Straight Mono Boom 34’5” ft Attachment Envelope 1 with industrial stick 25’7” 2 with industrial stick 29’6” 3 with industrial stick 25’7” and grapple model GMM 80-5 4 with industrial stick 29’6” and grapple model GMM 80-5 Operating Weight The operating weight includes basic machine with 4 pt. outriggers, hydr. cab elevation, 4 solid tires and industrial attachment with industrial-type straight mono boom 34’5”. with grapple model GMM 80-5/2.22 yd3 semi-closed tines Weight and industrial stick 25’7” 167,990 lb and industrial stick 29’6” 169,100 lb...

Open the catalog to page 4

Lift Capacities In longitudinal position of undercarriage * Limited by hydr. capacity The lift capacities on the stick end without attachment are stated in lb x 1,000 and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 360° with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/– 15°) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads comply with the ISO 10567 standard and do not...

Open the catalog to page 5

Industrial Attachment with Industrial-Type Straight Mono Boom 37’9” ft Attachment Envelope 1 with industrial stick 29’ 6” 2 with industrial stick 32’10” 3 with industrial stick 29’ 6” and grapple model GMM 80-5 4 with industrial stick 32’10” and grapple model GMM 80-5 Operating Weight The operating weight includes basic machine with 4 pt. outriggers, hydr. cab elevation, 4 solid tires and industrial attachment with industrial-type straight mono boom 37’9”. with grapple model GMM 80-5/2.22 yd3 semi-closed tines Weight and industrial stick 29’ 6” 170,420 lb and industrial stick 32’10”...

Open the catalog to page 6

Open the catalog to page 7

Industrial Attachment with Industrial-Type Angled Mono Boom 37’9” ft 70 Attachment Envelope 1 with industrial stick 29’ 6” 2 with industrial stick 32’10” 3 with industrial stick 29’ 6” and clamshell model GM 22C 4 with industrial stick 32’10” and clamshell model GM 22C Operating Weight The operating weight includes basic machine with 4 pt. outriggers, hydr. cab elevation, 4 solid tires and industrial attachment with industrial-type angled mono boom 37’9”. with clamshell model GM 22C/3.27 yd3 shells for loose material and industrial stick 29’ 6” and industrial stick 32’10” Kinematic...

Open the catalog to page 8

Open the catalog to page 9

Industrial Attachment with Industrial-Type Straight Mono Boom 41’ ft 80 Attachment Envelope 1 with industrial stick 29’ 6” 2 with industrial stick 32’10” 3 with industrial stick 29’ 6” and grapple model GMM 80-5 4 with industrial stick 32’10” and grapple model GMM 80-5 Operating Weight The operating weight includes basic machine with 4 pt. outriggers, hydr. cab elevation, 4 solid tires and industrial attachment with industrial-type straight mono boom 41’. with grapple model GMM 80-5/1.83 yd3 semi-closed tines Weight and industrial stick 29’ 6” 171,520 lb and industrial stick 32’10”...

Open the catalog to page 10