*mynauticexpo

LW SC-400 E

Product catalog summary

Overview: The document provides technical specifications and options for the LW SC-400 E air-cooled piston compressor manufactured by Lenhardt & Wagner GmbH. It includes detailed information on performance metrics, operational parameters, and available features.

Technical Specifications:

Type: Air-cooled piston compressor
Charging Rate: 400 litre/min, 24 Nm³/h, 14.1 cfm
Max Pressure: 350 bar
RPM: 900
No of Cylinders/Stages: 3/3
Prime Mover Type: E-Motor
Drive Power: 11.0 kW (50 Hz) / 13.2 kW (60 Hz)
Cooling Air Requirement: 3300 m³/h (50 Hz) / 3960 m³/h (60 Hz)
Lubrication Type: Oil pump
Oil Capacity: 2.7 litres
Oil Pressure: 1.5 bar (+/- 0.2)
Operating Temperature: +5°C to +45°C
Filter Capacity: 900 m³ at +20°C
Dimensions: 1540 x 730 x 1020 mm
Weight: 350 kg
Noise Level: 82 dB(A) at 1 m

Options:

Auto start system
200 and 300 bar parallel filling pressures
Phase monitoring with shutdown for incorrect rotation
Ambient temperature monitoring
Oil pressure gauge and monitoring with auto shutdown
Service interval indicator light
Cylinder head temperature monitoring with auto shutdown
Oil temperature display with auto shutdown
Puracon filter monitoring
Remote Tab Control (RTC)
Additional high-pressure outlet
Power cable and plug
Special voltages/frequencies on request

Specifications:

Electro motor
Powder-coated steel housing (RAL 7016)
Automatic condensate drain
Automatic stop at final pressure
Hour counter
Operating panel with start/stop and condensate test buttons, emergency stop switch
4x Filling hose with filling valve
Motor protection switch
Safety switch
Pressure maintaining and non-return valve
All pistons with steel piston rings
Low-pressure oil pump and filter
Oil/Water separators in stainless steel
Safety valves after each stage
3 concentric suction/pressure valves
Filling pressure options (200 or 300 bar)
Connection options (DIN 200/300 bar, CGA 200/300 bar, INT)
Breathing air purification in accordance with EN 12021

Catalog excerpts

LW SC-400 E » Electro motor » Powder coated steel housing (RAL 7016) » Automatic condensate drain » Automatic stop at final pressure » Hour counter » Operating panel c/w start/stop and condensate test buttons, as well as emergency stop switch » 4x Filling hose c/w filling valve » Motor protection switch » Safety switch » Pressure maintaining and non return valve » All pistons c/w steel piston rings » Low pressure oil pump and filter » Oil- / Water separators in stainless steel » Safety valves after each stage » 3 concentric suction/pressure valves » Filling pressure of your choice (200 or 300...

Open the catalog to page 2

LW SC-400 E

LW SC-400 E

Catalog excerpts

All Lenhardt & Wagner catalogs and brochures