*mynauticexpo

LW SC-300 ES

Product catalog summary

Overview: The LW SC-300 ES is a high-performance air-cooled piston compressor designed by Lenhardt & Wagner GmbH. It features advanced specifications and options suitable for various industrial applications.

Specifications:

Equipped with an electro motor and a powder-coated steel housing for durability.
Includes sound insulation and automatic condensate drain for efficient operation.
Features an automatic stop at final pressure and an hour counter for monitoring usage.
Comes with an operating panel that includes start/stop, condensate test button, and an emergency stop switch.
Includes two filling hoses and valves, with options for additional hoses and parallel filling pressures.
Incorporates motor protection switch, pressure maintaining, and non-return valve.
All pistons are equipped with steel piston rings, and it has a low-pressure oil pump and filter.
Oil and water separators are installed after the 2nd and 3rd stages, with safety valves after each stage.
Offers filling pressure options of 200 or 300 bar, with various connection types available.
Ensures breathing air purification in accordance with EN 12021.

Options:

Auto start system and up to two additional filling hoses.
Phase monitoring with shutdown for incorrect rotation direction.
Ambient temperature monitoring and service interval indicator light.
Oil pressure gauge and monitoring with auto shutdown.
Cylinder head and oil temperature monitoring with auto shutdown.
1.7 l filter housing with a capacity of 900 m³ at +20°C.
Puracon filter monitoring and Remote Tab Control (RTC).
Additional high-pressure outlet and special voltages/frequencies available on request.

Technical Data:

Type: Air-cooled piston compressor.
Charging rate: 300 litre/min, 18 Nm³/h, 10.6 cfm.
Max Pressure: 350 bar.
RPM: 1270.
Number of cylinders/stages: 3/3.
Prime mover type: E-Motor with drive power of 7.5 kW (50 Hz) / 9.0 kW (60 Hz).
Cooling air requirement: 2250 m³/h (50 Hz) / 2700 m³/h (60 Hz).
Lubrication type: Oil pump + Splash oil.
Oil capacity: 1.8 litres.
Oil pressure: 0.6 - 4.0 bar.
Operating temperature: +5°C to +45°C.
Filter capacity: 500 m³ at +20°C.
Dimensions: 760 x 1030 x 1630 mm.
Weight: 328 kg.
Noise level: 62 dB(A) measured at 1 m.

Catalog excerpts

Figure with following options: 2 additional filling hoses and parallel filling pressures

Open the catalog to page 1

LW SC-300 ES » Electro motor » Powder coated steel housing (RAL 7016) » Sound insulated housing » Automatic condensate drain » Automatic stop at final pressure » Hour counter » Operating panel with start/stop and condensate test button, as well emergency stop switch » 2 x Filling hose and filling valve » Motor protection switch » Pressure maintaining and non return valve » All pistons c/w steel piston rings » Low pressure oil pump and filter » Oil- / Water separators after 2nd and 3rd stage » Safety valves after each stage » 3 x concentric suction/pressure valves » Filling pressure to your choice...

Open the catalog to page 2

LW SC-300 ES

LW SC-300 ES

Catalog excerpts

All Lenhardt & Wagner catalogs and brochures