*mynauticexpo

LW SC-180 ES

Product catalog summary

Overview: The LW SC-180 ES is an air-cooled piston compressor designed by Lenhardt & Wagner GmbH. It features a robust design with options for additional filling hoses and parallel filling pressures.

Technical Specifications:

Type: Air cooled piston compressor
Charging Rate: 180 litre/min, 10.8 Nm³/h, 5.3 cfm
Max Pressure: 350 bar
RPM: 1505
Number of Cylinders/Stages: 3/3
Prime Mover Type: E-Motor
Drive Power: 4.0 kW (50 Hz) / 4.8 kW (60 Hz)
Cooling Air Requirement: 1200 m³/h (50 Hz) / 1400 m³/h (60 Hz)
Lubrication Type: Splash oil (oil pump optional)
Oil Capacity: 0.8 litre
Oil Pressure: 0.6 - 4.0 bar
Operating Temperature: +5°C to +45°C
Filter Capacity: 500 m³ at +20°C
Dimensions: 816 x 1106 x 1326 mm
Weight: 263 kg
Noise Level: 61 dB(A)

Standard Features:

Electro motor with powder-coated steel housing
Sound insulated housing
Automatic condensate drain and stop at final pressure
Hour counter and emergency stop switch
Filling hoses and valves with safety switch
Pressure maintaining and non-return valve
Oil/Water separators and safety valves after each stage
Maintenance doors on both sides
Customizable filling pressure and connections
Breathing air purification compliant with EN 12021

Optional Features:

Auto start system and additional filling hoses
Parallel filling pressures (200 and 300 bar)
Phase monitoring with shut down for incorrect rotation
Service interval indicator light
Ambient temperature and motor protection monitoring
Oil pressure and temperature monitoring with auto shut down
Filter housing with Puracon filter monitoring
Remote Tab Control (RTC) and additional high-pressure outlet
Special voltages/frequencies available on request

Catalog excerpts

Figure with following options: 2 additional filling hoses and parallel filling pressures

Open the catalog to page 1

LW SC-180 ES » Electro motor » Powder coated steel housing (RAL 7016) » Sound insulated housing » Automatic condensate drain » Automatic stop at final pressure » Hour counter » Main-, Start/Stop- and condensate test buttons, as well as emergency stop switch » 2 x Filling hose and filling valve » Safety switch » Pressure maintaining and non return valve » Alle Kolben mit Stahlkolbenringen » Oil- / Water separators after 2nd and 3rd stage » Safety valves after each stage » 3 x concentric suction/pressure valves » Maintenance door on both sides » Filling pressure to your choice (200 or 300 bar)...

Open the catalog to page 2

LW SC-180 ES

LW SC-180 ES

Catalog excerpts

All Lenhardt & Wagner catalogs and brochures