LW 320 B AL Nautic as a fully automatic stationary system by adding the available extras. It comes ready to start with 4 stroke Briggs & Stratton motor and with a lightweight and seawater resistant aluminum frame. » 4 stroke Briggs & Stratton drive motor » Seawater resistant aluminum-frame (Colour: RAL 9006) » Crash frame c/w 4 carrying handles and sling eyes » Hour counter and integrated pressure gauge » Manual condensate drain » 4x Filling hose c/w filling valve » Pressure maintaining and non return valve » All pistons with steel piston rings » NEW - Improved lubrication system with adjustable oil pump » Low pressure oil pump with oil sieve » Oil- / Water separators in stainless steel » Safety valves after each stage » Filling pressure to your choice (200 or 300 bar) » Connections to your choice (DIN 200 bar or 300 bar, CGA 200 bar or 300 bar and INT) » Breathing air purification an accordance to EN 12021 Options » Automatic condensate drain » Automatic stop at final pressure » 200 and 300 bar parallel filling pressures » Additional high pressure outlet » Oil pressure gauge » Wheel set Technical Data LW 320 B AL Nautic Type: Capacity [litre/min] / [Nm³/h] / [cfm]: Max. Pressure [bar]: RPM [1/min]: No of cylinders / No of stages: Prime mover type: Drive power [kW]: Cooling air requirement [Nm³/h]: Lubrication type: Oil capacity [litre]: Oil pressure [bar]: Operating temperature [°C]: Filter capacity [m³ at +20°C] 1): Dimensions W x D x H [mm]: Weight [kg]: Noise level (measured at 1 m) [dB(A)]: 1) The LW 320 B Al Nautic is designed for mobile use but also suitable for stationary applications