LW 100 E ECO The extremely light, robust and reliable ECO series consists of 100% of the solid components of the LW 100 compressors as engine, compressor block, filter system and filling device. The LW 100 ECO convince our worldwide customers with its high quality „Made in Germany“. The hardened cylinder liners and the steel piston rings in all compressor stages ensure a long lifetime without loss of performance. » Electro motor (E-Motor / 400V / 3 Phase / 50 Hz) » Power cable with plug » Start/Stop Switch » Aluminium frame » Manual condensate drain » Pressure maintaining and non return valve » 1x Filling hose c/w filling valve and pressure gauge » Intermediate coolers » Oil- / Water separators after 2nd and 3rd stage » Safety valves after for each stage » Pistons c/w steel piston rings » Filling pressure to your choice (200 or 300 bar) » Connections to your choice » Frame in a aluminium (Standard: s/s) » No carrying handles » Unpainted compressor block » No filling valve holder » Breathing air purification an accordance to EN 12021 Options » Carrying handles » Filling valve holder » Additional filling hose c/w filling valve » Automatic condensate drain » Automatic stop at final pressure c/w hour counter » Switch over device for 200 or 300 bar » Motor protection switch » Special voltages / frequencies on request » Conversion set: Petrol-/electro version » Trolley Technical Data LW 100 E ECO Type: Capacity [litre/min] / [Nm³/h] / [cfm]: Max. Pressure [bar]: RPM [1/min]: No of cylinders / No of stages: Prime mover type: Drive power [kW] with 50 Hz / 60 Hz: Cooling air req. [m³/h] with 50 Hz / 60 Hz: Lubrication type: Oil capacity [litre]: Operating temperature [°C]: Filter capacity [m³ at +20°C] 1): Dimensions W x D x H [mm]: Weight [kg]: Noise level (measured at 1 m) [dB(A)]: 1)