High Performance Trim Tab Kits
1Pages

12-Volt / Single & Dual Actuator Boat LEVELING system WE MAKE THE BEST BOATS BETTER! High Performance Trim Tab Kits High Performance (HP) Trim Tab Kits High Performance (HP) Trim Tab Kits This powerful, unique series is designed for multiple engine applications with limited transom space. The contoured blade design allows extra space for engines to turn while reducing cavitation to the props. Boat lengths 16’ (4.9 m) to 40’ (12.2 m). Same powerful features and unique blade design as the single HP series with double the actuator support for larger, faster boats. Boat lengths 24’ (7.3 m) to 52’ (15.8 m). Blades are constructed of Electro-Polished 7 gauge (4.6 mm) laser cut 304 stainless steel with heavy duty hinge with 3/8” (9.5 mm) diameter hinge pin. Full transom back plate with mechanical strain-relief cable seals, welded on stainless steel upper & adjustable lower actuator mounting brackets, 3/8” (9.5 mm) stainless steel mounting bolts. 3.75” (9.5 cm) sacrificial anodes installed. Kits include: Blades are constructed of Electro-Polished 7 gauge (4.6 mm) laser cut 304 stainless steel, heavy duty hinge with 3/8” (9.5 mm) diameter hinge pin. Full transom back plate with mechanical strain-relief cable seals, welded on stainless steel upper & adjustable lower actuator mounting brackets, 3/8” (9.5 mm) stainless steel mounting bolts. 3.75” (9.5 cm) sacrificial anodes installed. Kits include: SHIPPED FULLY SHIPPED FULLY }} (2) 7-gauge stainless steel ASSEMBLED Electro-Polished blades }} (2) 15056-001 XD Extreme Duty actuators with 6' (1.8 m) leads & Deutsch connectors }} Note: Boat-mounting hardware to be supplied by the customer }} (4) 15056-001 XD Extreme Duty actuators with 6’ (1.8 m) leads & Deutsch connectors }} Lenco owner's/installation manual }} (2) 7-gauge stainless steel ASSEMBLED Electro-Polished blades Size description to be used with chart below. }} Note: Actuator extension harnesses not in kits, must be purchased separately (2 required) see page 32 Back Plate Dimensions 15049-101 Size description to be used with chart below. }} Note: Actuator extension harnesses not in kits, must be purchased separately (4 required) see page 32 The actuator leads pass through the water-tight mechanical strain-relief cable seal and the back plate before passing through the transom. This applies to all products with back plates. }} Note: Boat-mounting hardware to be supplied by the customer Back Plate Dimensions }} Lenco owner's/installation manual Size Description High Performance Trim Tab Kits - 12-volt The actuator leads pass through the water-tight mechanical strain-relief cable seal and the back plate before passing through the transom. This applies to all products with back plates. High Performance Trim Tab Kits - 12-volt Single Actuator Kits Dual Actuator Kits Lenco Part# Boat Length Lenco Part# Boat Length Switch kits sold separately See Lenco catalog page 20 through 21 or visit the product section of lencomarine.com Switch kit sold separately See Lenco catalog page 20 or visit the product section of lencomarine.com