Edge Mount Trim Tab Kits
1Pages

12-Volt / Single Actuator Kits Boat LEVELING system WE MAKE THE BEST BOATS BETTER! Edge Mount Trim Tab Kits Edge Mount Trim Tab Kits Electro-Polished Edge Mount Trim Tab Kits Designed for boat applications where a lower actuator mounting height is desirable. Actuator mounts at the trailing edge of the blade giving it a ½” (1.3 cm) lower mounting height on 9” (22.9 cm) long blades & 3” (7.6 cm) lower mounting height on 12” (30.5 cm) long blades. All edges are turned up for added strength and style. Boat lengths 14’ (4.3 m) to 36’ (11 m). All the same features of the Edge Mount series with the addition of Electro-Polished blades. Electro-Polish adds a mirror finish and the ultimate corrosion protection. Actuator mounts at the trailing edge of these 12” (30.5 cm) blades giving them a 3” (7.6 cm) lower mounting height. Boat Lengths 14’ (4.3 m) to 30’ (9.1 m). Blades are constructed of 12 gauge (2.7 mm) laser cut 304 stainless steel with 1” (2.5 cm) turned up edges and a 5 degree taper on both sides to the trailing edge, & 1/8” (3.2 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal. Blades are constructed of Electro-Polished 12 gauge (2.7 mm) laser cut 304 stainless steel with a 1” (2.5 cm) turned up edges and a 5 degree taper on both sides to the trailing edge & 1/8” (3.2 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal. Kits include: Kits include: }} (2) 12-gauge stainless steel standard finish blades }} (2) 12-gauge stainless steel Electro-Polished blades }} (2) 15054-001 actuators with 6' (1.8 m) leads and Deutsch connectors Size description to be used with chart below. }} (2) 15085-001 upper mounting brackets with gland seal }} (2) 50014-001 lower mounting brackets }} Lenco owner’s/installation manual }} Stainless steel mounting hardware }} (2) 15085-001 upper mounting brackets with gland seal = Length of tab = Width of hinge Size description to be used with chart below. }} (2) 50014-001 lower mounting brackets }} Lenco owner’s/installation manual }} Stainless steel mounting hardware Edge Mount (27.94 cm) height needed for actuator in 12" (30.48 cm) tab length (27.94 cm) height needed for actuator in 12" (30.48 cm) tab length }} (2) 30133-103 actuator extension wiring harnesses - 20’ (6.1 m) length Size Description Edge Mount (34.29 cm) height needed for actuator in 9" (22.86) tab length }} (2) 30133-103 actuator extension wiring harnesses - 20’ (6.1 m) length }} (2) 15054-001 actuators with 6' (1.8 m) leads and Deutsch connectors Edge Mount Trim Tab Kits - 12-volt Edge Mount Electro-Polished Trim Tab Kits - 12-Volt Min.Transom Height Lenco Part# Boat Length Hinge Height Lenco Part# Boat Length Hinge Height Switch kits sold separately See Lenco catalog page 20 through 21 or visit the product section of lencomarine.com Switch kits sold separately