DockMaster: A Revolution in Docking
6Pages

DockMaster: A Revolution in Docking Designed from the ground up to provide a seamless docking and recharging solution, without the hassle of ropes and cables, Lemvos has developed DockMaster. DockMaster is primarily designed for use with electric vessels, but it can also be used with sail or combustion engine vessels, with or without the charging function. Compatible with 100% autonomous docking Integrated high current DC charging Compact and lightweight design allowing for easy integration Ropeless Docking Cableless Charging Shock absorbing design How it Works POLE FIXED TO DOCK LATCH FIXED TO VESSEL Latch undocked from the fixed pole, vessel is free to move. Latch fixed to pole, high current charging can take place. Vessel is secured. Lemvos GmbH A Am Mittleren Moos 48, 86167 Augsburg

Latch Specifications and Dimensions Specification Max Recommended Vessel Size Maximum Roll (while docked) Maximum Pitch (while docked) Charging Power Charging Voltages Charging Current Electrical Connector (battery charging power) Flying leads - High Current, Silicone Insulated Input Power Electrical Connector (Latch Release) Power Supply (Latch Release) Latched State Feedback Lemvos GmbH A Am Mittleren Moos 48, 86167 Augsburg Digital Signal Output

Connection diagram M12 Connector Pin Typical Cable Core Colour Grey or Green/ Yellow Description Power Supply for latch release 12-30V DC from vessel ignition switch 12V Supply for digital release signal, for switch or relay. Ground Connection 12V digital feedback, high when latched, 500mA max output Digital Release Signal 12-30V DC, pulse to open for ~30 seconds Typical electrical installation Lemvos GmbH A Am Mittleren Moos 48, 86167 Augsburg

Pole Dimensions The pole is deigned to be used on a floating dock, with 600mm vertical movement possible for variations in loading If your application involves docking to a non-floating dock, with more than 600mm of water height variation contact us for other options The stern of the boat must be confined to prevent excessive rotation A 230V or 110V power source is required on the shore side for the charging function Mounting of the IP67 pole power supply size should be within 2m of the docking pole Lemvos GmbH A Am Mittleren Moos 48, 86167 Augsburg

Ordering Details Series Latch Options Pole Options Power Supply Description With Electrical Contacts Without Electrical Contacts Not Included (Pole Only) Pole with Shock Absorber Rigid Pole Not Included (Latch Only) Description 12V 20A Power supply 12V 50A Power Supply 24V 10A Power supply 24V 50A Power Supply 48V 30A Power Supply 48V 50A Power Supply Custom 5-65V, 550A None For a DockMaster without the charging function select option “W” for “Latch Options” and option “0000” under “Power Supply”. For example: DM10-W-S-0000 For any boat over 250kg option ”S” under “Pole Options” is...

Application Examples The DockMaster solution can be applied to almost any type of vessel to ease docking and/or charging, and prevent theft. USVs The use of USVs in combination with the DockMaster provides a highly valuable solution, and was originally developed for this purpose. By using the DockMaster you no longer need someone on site to launch and secure your vessel, it can remain secured and charging 24/7 when not in active service. A digital signal will provide a confirmation that the latch is secured. Custom Solutions For other applications requiring higher power, larger vessel sizes...