Catalogs >
LeisureCat >
6000 Brumby

6000 Brumby
2Pages

Catalog excerpts

by LeisureCat Australia/Malaysia The LeisureCat 6000 Brumby has a generous area forward for storage and sleeping, with a recessed storage box in the portside hull allowing for a toilet. There is more than enough room to store all of the gear required for a weekender of a 4-man dive trip, keeping it all in place and dry. The moulded, curved safety-glass windscreen offers more than adequate protection from any errant spray that may result from the ride as you race across a 5-6 ft wind-swept chop. A unique feature also to this model is the special spray rail joining both hulls forward to trap any water rushing up from the tunnel as the bow rides down the swell and easily up over the next. Fully loaded, with fuel and two people, the 90 Etech’s on the demo boat delivered a 35 knot top speed at their desired max rpm of 5200. Rated to twin 115 hp 4 strokes. The dash area is large enough for all the instrumentation, as well as two of the large 12 in screens so popular today. The helm bench seats and rear passenger seats are moulded to each side of the boat, offering huge storage under and comfortable ride position.

Open the catalog to page 1

General Specifications • LOA (incl engines): 6.50 metre (21ft 3in) • Moulded length: 5.90 metre (19ft 4in) • Beam: 2.30 metre (7ft 6in) • Draught: 0.30 metre (12in) • Wavebreaker: Full length. • Fuel storage: 2 x 180 litres (2 x 47.5 gal/US). • Dry hull weight: 920 kg (2034 lbs). • Weight including engines: 1470 kg (3249 lbs). • Aluminium trailer weight: 180 kg (1061 lbs). • Recommended power: 2 x 70 to 115 hp. • Multiple hull compartments. • Full-length, reinforced keel sections. • Fully self-draining deck with walk-through transom. • Self-draining, moulded engine wells included in hull. •...

Open the catalog to page 2