1. Catalogs
  2. Lectrotab
  3. ovalLEDcontrol

ovalLEDcontrol

ovalLEDcontrol

ovalLEDcontrol

Product catalog summary
Overview: The document describes the features, specifications, and installation instructions for the Oval control, a microprocessor-based trim tab control system with LED position indicators, designed by Linear Devices Corporation.
Features:
  • Microprocessor-based control with LED indicators for tab position.
  • Completely sealed and waterproof, resistant to sunlight deterioration.
  • Automatic tab retraction and calibration upon power switch on/off.
  • LED indicators adjust brightness based on ambient light conditions.
  • Compatible with up to 6 stations and 2 actuators per tab on 12vdc, 4 actuators on 24vdc systems.
  • Available in black or gray display colors.
Specifications:
  • Model Numbers: SETR-61 (Black), SETR-60 (Gray).
  • Dimensions: Overall width 3.94" (100mm), height 3.38" (86mm), mounting hole cutout diameter 2"-2.5" (51mm-63.5mm).
  • Voltage: 12/24 VDC with specific fuse sizes for different configurations.
Programming Instructions:
  • Enter program mode by applying 12vdc or 24vdc to the main power and switching the AUX terminal.
  • Adjust settings using specific button sequences for timing, LED on/off, and LED swap functions.
Installation and Wiring:
  • Use 14ga wire for DC ground and input power connections.
  • Ensure input voltage matches the actuator's voltage rating.
  • Auxiliary terminal typically connected to a +12vdc source for tab retraction and recalibration.
Additional Notes:
  • Extended cables available for actuator connections.
  • Installation diagram provided for wiring and setup guidance.
See more

Catalog excerpts

ovalLEDcontrol-1

Oval LED Control The Oval control combines a microprocessor based trim tab control with an LED tab position indicator. This control incorporates automatic tab retraction and calibration whenever the control power is switched on or off. This unique design requires no feedback sensor for tab position. LED indicators automatically dim at night and brighten in sunlight. The Oval is completely sealed and waterproof. Its rubberized cover is UV protected and will not deteriorate in sunlight. The control switch is selfcontained and does not require an additional control box. Lectrotab’s Oval control can be used as a single station or can handle up to 6 stations in constant communication with each other. SETR-61 Oval Control FEATURES • Microprocessor based trim tab control with LED tab position indicators • Completely sealed, completely waterproof and will not deteriorate in sunlight • Tabs automatically retract and calibrate on key switch on or off • Easy upgrade from rocker switch style control with BP-10 mounting plate • No external power module required • Automatically dims LED tab position indicators in darkness and brightens in sunlight • Adjustable programming features located on back of specification sheet • Operates up to 6 stations (Use 1 SR cable per Oval control for each station) • Operates up to 2 actuators per tab on 12vdc and 4 actuators per tab on 24vdc systems • Black or Gray color display available SPECIFICATIONS Number of Stations Overall Width Mounting Overall DC Hole Cutout Height Voltage Fuse Size Power Input Fuse Size Power Input Fuse Size AUX Terminal Model Number Display Color SETR-61 Black Up to 6 (Use 1 SR 3.94"/ Cable per SETR for 2 or more stations) 100mm 3.38"/ 86mm 2"/51mm 2.5"/63.5mm 12/24 12vdc = 20 amp 24vdc = 10 amp 12vdc = 30 amp 24vdc = 20 amp .1 amp SETR-60 Gray Up to 6 (Use 1 SR 3.94"/ Cable per SETR for 2 or more stations) 100mm 3.38"/ 86mm 2"/51mm 2.5"/63.5mm 12/24 12vdc = 20 amp 24vdc = 10 amp 12vdc = 30 amp 24vdc = 20 amp .1 amp (Diameter) Linear Devices Corporation 8790 Park Central Drive, Richmond, VA 23772 www.lectrotab.com, Ph 804-261-3888, Fax 804-264-3070 January 2011 (1 Actuators per Tab) (2 Actuators per Tab) (MUST CONNECT)

 Open the catalog to page 1
ovalLEDcontrol-2

OVAL (SETR) WIRING/INSTALLATION DIAGRAM "OVAL " (SETR) Control Installation/Wiring Diagram W4-** (**=length) 4 conductor, 14 AWG interconnect cable may be used or actuator may be ordered with extended cable i.e. A-BK-13 = 23 ft. (7m), A-BK-24 = 28 ft. (8.5m) connecting to SETR. Communications Port for second station. See Installation Manual for details. Oval (SETR) Control Port Actuator BK RD (+) BK RD GN WH AUX (-) W4-** Interconnect Cable GN WHITE BLACK OR Use A-BK-13 or A-BK-24 extended cable from actuator connecting directly to SETR. MUST CONNECT .1 amp Fuse Oval (SETR) Control Dimensions...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.