Stainless Steel Trim Tabs DUAL ACTUATOR The Lectrotab dual actuator mounted stainless steel trim tabs are designed to double the pushing force compared to single actuator tabs. All stainless steel tabs are fabricated with a continuous rolled and pinned hinge. This design eliminates the need for welding. The tabs are made of corrosion resistant 12 gauge, 304 stainless steel and are available in standard finish (as shown), or black powder coated stainless steel. Standard tabs are available in 12“ (30cm) chord lengths and in widths between 12” (30cm) and 48” (122cm). See specification chart for dimensional details. All tabs exceeding a 24” (61cm) width feature a 90 degree bent up trailing edge for additional strength. Edges can be turned up or down, made straight or tapered, and reinforced in any way. For galvanic protection, pre-installed zinc anodes are also available. FEATURES • Trim tabs designed for 2 actuators per tab mounting • Doubles the pushing force compared to single actuator tabs (2000 lbs per tab) • Strong, corrosion resistant 12 gauge, 304 stainless steel • Continuous rolled and pinned hinge provides added strength and eliminates welding • Standard chord lengths available in 12”(30cm) and widths from 12”(30cm) to 48” (122cm) • Custom chord lengths and widths are also available • Black powder coated finish available • Zinc anodes may be installed for additional galvanic corrosion resistance • Bent trailing edge standard for tabs exceeding 24”width • Includes carriage bolts and nuts for actuator mounting to tab Linear Devices Corporation 8790 Park Central Drive, Richmond, VA 23772 www.lectrotab.com, Ph 804-261-38

DUAL ACTUATOR STAINLESS STEEL TAB DIMENSIONS Hinge Pin Center Line_ Linear Devices Corporation 8790 Park Central Drive, Richmond, VA 23772