Trim Tab Actuators STANDARD Lectrotab trim tab actuators are precision-engineered to combine quiet operation with a non-hydraulic, maintenance free design. The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates either a standard or low profile transom mounting bracket. Actuators come in 12 and 24 VDC with 8 second recommended stroke time or 4 second stroke time. FEATURES • Actuator covered by a Lifetime Warranty • Upper ram seal patented location cannot be damaged due to fouled ram or barnacle growth • Utilizes patented internal pressure equalization system • Upgrades to most popular hydraulic and electromechanical systems • Internal brake system prevents unwanted tab movement when under way or backing down • Quiet operation • All actuators fully load tested to push 1000 lbs of force • Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Linear Devices Corporation 8790 Park Central Drive, Richmond, VA 23772 www.lectrotab.com, Ph 804-261-3888, Fax 804-264-3070 January 2011

TRIM TAB ACTUATOR MOUNTING DIMENSTIONS Standard Actuator 2¼" (57mm) full stroke Varies w/Transom Angle Varies w/Transom Angle Transom Varies w/Transom Angle (Low Profile Bracket) 12 5/8" (321 mm) 11 9/16" (294mm) Transom Angle 13 5/8" (346 mm) 11 9/16" (294mm) (Low Profile 11 7/8" Bracket) (302 mm) 10 7/8" Varies (276 mm) w/Transom 1/4" Minimum (6mm) Boat Bottom 1/4" (6mm) Minimum 3 74" (197mm) typ Boat Bottom Transom Mounting Hinge 1/2" (13mm) Approx. Under Hull Pocket Mounting SPECIFICATIONS (Feet/Meter) Upper Mounting Bracket Lower Mounting Bracket Use Actuator w/ Tabs 11.875"/302mm 6'/1.8m...