ActuatorSpecSheetHeavyDuty
2Pages

Trim Tab Actuators HEAVY DUTY Lectrotab meets the needs of boats operating at high speeds or in rough conditions by offering its heavy duty trim tab actuator. The heavy duty actuator features a reinforced upper mounting boss and a 12 gauge stainless steel upper bracket. Lectrotab heavy duty trim tab actuators are precisionengineered to combine quiet operation with a non-hydraulic, maintenance free design. The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates a standard or low profile transom mounting bracket. Actuators come in 12 and 24 VDC with 8 second recommended stroke time. FEATURES • Actuator covered by a Lifetime Warranty • Stainless Steel upper mounting bracket • Reinforced actuator upper mounting boss • Upper ram seal patented location cannot be damaged due to fouled ram or barnacle growth • Utilizes patented internal pressure equalization system • Upgrades to most popular hydraulic and electromechanical systems • Internal brake system prevents unwanted tab movement when under way or backing down • Quiet operation • All actuators fully load tested to push 1000 lbs of force • Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Linear Devices Corporation 8790 Park Central Drive, Richmond, VA 23772 www.lectrotab.com, Ph 804-261-3888, Fax 804-264-3070 January 2011

11 7/8" (302 mm) 11 9/16" (294mm) 10 7/8" (276 mm) Varies w/Transom Angle Heavy Duty Actuator 2¼" (57mm) full stroke 13 5/8" (346mm) 11 9/16" (294mm) Transom Varies w/Transom Angle Transom TRIM TAB ACTUATOR MOUNTING DIMENSTIONS 1/4" Minimum (6mm) Boat Bottom 3 74" (197mm) typ 1/4" (6mm) Minimum Boat Bottom Transom Mounting Hinge 1/2" (13mm) Approx. Under Hull Pocket Mounting SPECIFICATIONS A-BK-29 Cable Vertical Height DC Stroke Distance from (Typical Installation Length Upper Mounting Voltage Stroke Length Time Bolt to Pin Bracket Fully Retracted) (Feet/Meter) Stainless Steel 12VDC 2.25"/...