Dimensional data cost effective solution for open mould processes used as core material and/or print blocker n a polyester nonwoven and compatible with all Is regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy n Is suitable for hand lay-up and spray-up processes n Is Roll length Roll width Resin uptake Dry weight Applications Lantor Coremat XM ® hulls, decks, and structures of boats and yachts parts and panels of cars, trailers and trucks n ass transit: interior and exterior of trains, light rail M and buses n Leisure: kayaks, surfboards, pools and tubs n Industrial: cladding panels, containers and tanks n Wind Energy: nacelle covers and spinners Typical mechanical properties of Lantor Coremat XM* impregnated with unsaturated polyester resin ® Mechanical properties test method Flexural strength Flexural modulus Tensile strength across layers Compression strength: 10% strain Shear strength Shear modulus *Lantor Coremat Information The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV can not be held liable of any damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to the information provide at any time without further notice. PO box 45 - 3900 AA Verlaat 22 - 3901 RG Veenendaal The Netherlands T +31(0) 318 537 111 [email protected] enabling performance www.lantor.com Core material and print through barrier for open mould processes n Honeycomb excellent drapeability n Extra resin saving