CRUISER PLUS

CRUISER PLUS

Product catalog summary
Overview: The document provides technical specifications and applications for the Cruiser Plus, an 8-strand braided rope manufactured by LANEX a.s. This rope is noted for its very high tensile strength compared to standard ropes, allowing for smaller diameters and reduced storage space.
Specifications:
  • Material: Made from PES high tenacity multifilament and POLYS fibres.
  • Specific Gravity: 0.99 kg/dm3, indicating it is a floating rope.
  • Melting Temperature: 260/165 °C.
  • UV and Abrasion Resistance: Outstanding.
  • Water Absorption: Maximum of 0.1%.
  • Durability: Outstanding, with identical performance in dry and wet conditions.
  • TCLL Value: 76%.
Parameters: The rope is available in various diameters ranging from 28 mm to 104 mm, with corresponding weights and Minimum Breaking Loads (MBL) provided. The MBL values are compliant with ISO 2307 standards, and a spliced termination reduces MBL by 10%.
Load-Elongation Curves: The document includes a graph comparing the load-elongation performance of new and used ropes, indicating the percentage of MBL against elongation percentage.
Applications: The Cruiser Plus rope is suitable for use as towing lines, offshore lines, mooring lines, and mooring tails. It complies with OCIMF (MEG 2007) standards.
See more

Catalog excerpts

CRUISER PLUS-1

8 STRAND BRAIDED ROPE CRUISER PLUS VERY HIGH TENSILE STRENGTH ROPE IN COMPARISON WITH STANDARD ROPES, WHICH ALLOWS TO USE ROPES WITH SMALLER DIAMETERS WHICH REQUIRE LESS STORAGE SPACE. Cruiser Plus is very high tensile strength rope in comparison with standard ropes which allows to use ropes with smaller diameters which require less storage space. In addition, the rope exhibits better handling properties and non-rotating behavior in both dry and wet conditions. Diameter Circ. Weight MBL MBL mm inch kg/100 m t kN APPLICATIONS W TOWING LINES w OFFSHORE LINES w MOORING LINES w MOORING TAILS PARAMETERS Material PES high tenacity multifilament and POLYS fibres Floating yes Abrasion resistance outstanding Durability outstanding Water absorption max. 0.1 % Dry and wet conditions identical wet and dry conditions TCLL value 76 % Complies with OCIMF (MEG 2007) 28 3 1/2 47.5 17.3 170.0 Spliced Termination: -10 % MBL is in accordance with ISO 2307 LOAD - ELONGATION CURVES FOR NEW AND USED ROPE LANEX a. s. Hlucfriska 96/1, 747 23 Bolatice, Czech Republic E-mail: [email protected], www.lanex.cz

 Open the catalog to page 1

All LANEX a. s. catalogs and brochures

  1. HMPE ROPES

    2  Pages

  2. POLYESTER

    6  Pages

  3. POLYAMID

    1  Page

  4. PP MULTITEX

    1  Page

  5. POLYS

    1  Page

  6. MASTER

    1  Page

  7. CRUISER

    1  Page

  8. TITAN

    1  Page

  9. TITAN PLUS

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.