TEXCUT 3001 C
3Pages

{{requestButtons}}

Catalog excerpts

TEXCUT 3001 C - 2

SPECIAL MACHINES since 1912 SCANNING - RECOGNITION - CUTTING Using the integrated camera system the carpets will be photographed. The cameras allow a rapid shot and direct repetition of the scanned image. The intuitive user interface „Shape Trapper" enables the handling of the system very quickly. Simple communication between software and cutter. By means of the software, the recorded images will be edited and filtered so that the screening will be produced directly for cutting. The cutting files will be passed on directly from the Scan-Software (Shape Trapper) to the HMI without...

Open the catalog to page 2
TEXCUT 3001 C - 3

Carpet cutter TC 3001 C 40 mm (according to tool) 70 m/min 100 m/min 7 m/s2 1,75 m / 2,15 m / 2,75 m / 3,25 m / 4,05 m 2,10 m / 2,50 m / 3,10 m / 3,60 m / 4,60 m 2,30 m / 3,50 m / 4,50 m 3,80 m / 5,00 m / 6,20 m TECHNICAL DATA: Maximum cutting height: Maximum rate of cutting: Maximum rate of positioning: Maximum acceleration: Working widths (Y): Table widths: Working lengths (X): Total lengths: Operating voltage: Electrical connection power Steerage / Gears: Vacuum-unit: Average uptake rate: Safeguarding: Protection rating: Compressed air (5-6 bar): Weight of cutter: Working height: Basic...

Open the catalog to page 3

All Kuris Spezialmaschinen catalogs and brochures

  1. TexKnife

    2 Pages

  2. ServoCutter

    2 Pages

  3. Tables

    2 Pages

  4. C 1414

    2 Pages

  5. LEATHER

    3 Pages

  6. A16

    2 Pages

  7. 492KR

    2 Pages

  8. A23

    3 Pages

  9. TexCut 3030

    3 Pages

  10. Leder-Cutter

    3 Pages

  11. C1414

    2 Pages

  12. CUTTY 2317

    3 Pages