C A R P E T CU T T ER TC 30 01 C W I T H I N T E G R AT E D C A M E R A-S Y S T E M SC ANNING – RECOGNITION – CU T TING

SCANNING – RECOGNITION – CUTTING Using the integrated camera system the carpets will be photographed. The cameras allow a rapid shot and direct repetition of the scanned image. The intuitive user interface „Shape Trapper“ enables the handling of the system very quickly. Simple communication between software and cutter. By means of the software, the recorded images will be edited and filtered so that the screening will be produced directly for cutting. The cutting files will be passed on directly from the Scan-Software (Shape Trapper) to the HMI without any additional commands by the operator....

Carpet cutter TC TECHNICAL DATA: Maximum cutting height: Maximum rate of cutting: Maximum rate of positioning: Maximum acceleration: Working widths (Y): Table widths: Working lengths (X): Total lengths: 3001 C 40 mm (according to tool) 70 m/min 100 m/min 7 m/s² 1,75 m / 2,15 m / 2,75 m / 3,25 m / 4,05 m 2,10 m / 2,50 m / 3,10 m / 3,60 m / 4,60 m 2,30 m / 3,50 m / 4,50 m 3,80 m / 5,00 m / 6,20 m Operating voltage: Electrical connection power Steerage / Gears: Vacuum-unit: Average uptake rate: Safeguarding: Protection rating: Compressed air (5-6 bar): Weight of cutter: Working height: Basic head,...