KUIPER_ARTBOARD
1Pages

TECHNICAL DATASHEET Postbus 2 | 7650 AA Tubbergen Molenstraat 34 | 7651 AX Tubbergen Tel: +31 (0)546 - 62 13 61 | Fax: +31 (0)546 - 62 25 85 E-mail: info@fineer.nl I www.fineer.nl KUIPER ARTBOARD DIMENSION: 244X122 CM WEIGHT: 160 KG/M3 - 15/18MM CORE CONSTRUCTION: OKOUME - ARTBOARD - OKOUME All the properties included in this technical data sheet refer to the following test methods : BS 476 part 7 Nordtest NT004 DIN 4102-1 N.B.: A copy of the corresponding certificates or test reports can be delivered on demand. KUIPER ARTBOARD is a sandwichpanel with an okoume top and bottom, with a Artboard core between. Oxygen index Thickness board At +23° C At +200° C Bunsen burner test Test method ASTM D 635-77 The Artboard is made by pressing and expanding a number of foam composite fibres to a suitable thickness. This unique process results in a material, wich combines several important properties. Optical smoke density NBS smoke density chamber 2 mm WithQ.uUlame Max. density Dm no smoke Dm, corrected no smoke The density of the material varies between 90 and 400 kg/m3 depending on thickness and/or application, the core can be easily bonded with okoume plywood, veneer or HPL. Artboard allows to cover and edge-bond directly. With flame Max. density Dm Dm, corrected The core has special fire resistance characteristics and low smoke development. It also has a good tensile strength and stands against both water and chemicals. Thickness board 3-6 mm Class 1 < 3% smoke Thickness board > 6 mm Class 2 < 5% smoke Flammability Smoke density Dripping Physical state: Form/colour: Odour: PH: Specific Gravity: Melting point: Solubility in water: Surface spread of flame Tendency to surface spread of flame