Environment friendly Powerful The Krautler Outboarder: powerful, quiet and reliable. But every ship is different! We have developed a wide range of brackets and mounting options for the requirements on your boat. Whether mounting on the straight stern, in the engine bay or for mounting at a rudder gland under your ship, Krautler has the right drive. The leading e-boat manufacturer in Europe confidence our technology, you can also benefit from our decades of experience. Controller Low noise With the comfortable single-lever controller a variable speed control in forward and reverse drive is possible. The high-quality electric controller works almost without loss and protects your valuable battery pack against too deep discharge. With the modern controller we have the possibility to adapt the drive system optimally to your ship. The luxury of being able to move almost silently is the most beautiful experience of navigating with an electrically powered boat. Whole chapters in the literature for the shipbuilding industry are devoted to noise reduction in the powertrain. The electric system with his uniform rotation has a low noise and vibration level. The future drive technology belongs to the electric motor. Besides the higher efficiency of an electric motor compared to a gasoline engine, the electric motor scores with its zero emissions. An additional advantage is that in comparison to the gasoline engine the electric motor is more simple structure and the resulting reduced amount of wear parts. possible options GPRV 0,5 and GPRV 0,8 with two-stage switch for speed control 104817 Rudder for GPRV 138910 Rudder for ACR 1,8, ACR 2,0 and ACR 4,0 Rudder for ACR 8,0 Special shaft length up to 1m to 5kW motor power Special shaft length up to 1m form 5kW up to 12kW Rudder gland for GPRV, ACR 1,8, ACR 2,0 and ACR 4,0 - 030mm, length 175mm Rudder gland for GPRV, ACR 1,8, ACR 2,0 and ACR 4,0 - 030mm, length 275mm Rudder gland for ACR 8,0 an d ACRS 11,0 - 040mm, length 205mm Rudder gland for ACR 8,0 an d ACRS 11,0 - 040mm, length 305mm ACR and ACRS Boost functio n 30 % power increase for 2 minutes Length of standard shaft: 450mm Krautler Elektromaschinen GmbH, Hohenemser Str. 47, A-6890 Lustenau, Austria Telefon +43 / 5577 / 82534-0, Fax +43 / 5577 / 82534-10 www.kraeutler.at, E-mail: [email protected]

Submersible pod motor for mounting in a rudder gland All electric drives with Submersible motors consist of • • • • • • • • Motor with appropriate bracket Electric regulation system mounted on an aluminium base plate with fuse and cut-off relay Single lever control (throttle) for panel mounting in standard version with key switch, status LED, black front panel, black aluminium lever and mounting screws o Special designs at additional cost Cable set: controller-battery 3m, controller-motor 1,5m, controller-single lever control 5m, o Optional cable lengths at additional cost Battery master switcher...