Inspiration For electric motors constructed ships have in the rarest cases, a shaft drive system, because the powertrain require much space and the installation of the shaft system is complex. However, the modification of an existing system is always a challenge that can be implemented with a shaft drive of Krautler. Whether sail or motor boat, whether daysailer or passenger ship, the possibilities are diverse and the demands on the systems highly. Krautler has the right solution for our boat. The luxury of being able to move almost silently is the most beautiful experience of navigating with an electrically powered boat. By the selection of the gearbox the efficiency and smooth running are very important. Only with the use of gears which match these criteria, it is possible to offer innovative drive solutions for your application. By a new boat design, the shaft and propeller are dimensioned according to the characteristics of the electric drive. For this application a Krautler shaft drive (without a gearbox) fits perfectly. For an existing shaft system with propeller, the shaft drive with a gearbox can be adjusted to the existing system. The future drive technology belongs to the electric motor. Besides the higher efficiency of an electric motor compared to a gasoline engine, the electric motor scores with its zero emissions. An additional advantage is that in comparison to the gasoline engine the electric motor is more simple structure and the resulting reduced amount of wear parts. Krautler Elektromaschinen GmbH, Hohenemser Str. 47, A-6890 Lustenau, Austria Telefon +43 / 5577 / 82534-0, Fax +43 / 5577 / 82534-10 www.kraeutler.at, E-mail: [email protected]

Shaft drives All electric drives for existing shafting (except for high speed) consist of: Motor with appropriate bracket or base plate with helical gear Clutch for shaft with Ø25mm Electric regulation system mounted on an aluminium base plate with fuse and cut-off relay Single lever control (throttle) for panel mounting in standard version with key switch, status LED, black front panel, black aluminium lever and mounting screws o Special designs at additional cost Cable set: controller-battery 3m, controller-motor 1,5m, controller-single lever control 5m o Optional cable lengths at additional...