NON ROTATING WIRE ROPES

Product catalog summary

Overview: This document provides technical specifications for non-rotating wire ropes, specifically focusing on the U4 X SES 39 19 X 7 SC (19X7) and 35 X 7 SC models, adhering to DIN3069 and DIN3071 standards.

Specifications:

Wire Rope Types: U4 X SES 39 19 X 7 SC (19X7) and 35 X 7 SC.
Standards: DIN3069 and DIN3071.
Tensile Strength (TS): Available in 1770 N/mm² and 1960 N/mm².

Key Parameters:

Diameter (mm): Ranges from 7 mm to 40 mm.
Weight (kg/m): Varies with diameter, starting from 0.20 kg/m for 7 mm to 7.26 kg/m for 40 mm.
Minimum Breaking Load (MBL in tonnes): Increases with diameter, from 2.90 tonnes for 7 mm to 115.19 tonnes for 40 mm.

Data Summary:

For each diameter, the document lists the weight per meter and the minimum breaking load for both tensile strengths (1770 N/mm² and 1960 N/mm²).
For example, a 10 mm diameter rope has a weight of 0.40 kg/m and an MBL of 7.05 tonnes at 1960 N/mm².

Recommendations:

Selection of wire rope should consider the specific application requirements, including load capacity and environmental conditions.
Ensure compliance with the specified DIN standards for safety and performance.

All Koronakis catalogs and brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list