Catalogs >
Kongsberg Maritime >
Offshore and subsea equipment rental catalogue

Offshore and subsea equipment rental catalogue
48Pages

Catalog excerpts

Offshore and subsea equipment rental catalogue - 2

We shall earn the respect and recognition for our dedication to provide innovative and reliable marine electronics that ensure optimal operation at sea. By utilising and integrating our technology, experience and competencies in positioning, hydroacoustics, communication, control, navigation, simulation, and automation, we aim to give our customers The Full Picture. Our success depends on the success of our customers. Actively listening to our customers and truly understanding their needs, and then translating these needs into successful products and solutions is central to achieving our...

Open the catalog to page 2

Offshore and subsea equipment rental catalogue - 3

KONGSBERG MARITIME RENTAL Kongsberg Maritime’s rental division supplies and supports our customers by providing a full rental solution anywhere in the world. The rental pool offers a range of KONGSBERG equipment to key markets including offshore oil and gas, subsea and merchant marine. There are many benefits to renting equipment and it can often save you time and money. Through our rental service you can rent for short-term or long-term projects and you will have access to KONGSBERG’s expertise and customer support. We will develop a solution that meets your specific requirements. UNITED...

Open the catalog to page 3

Offshore and subsea equipment rental catalogue - 4

ACOUSTIC POSITIONING – POSITIONING SYSTEMS HiPAP® 351P-MGC Portable System Calibration Free Portable Hydroacoustic Positioning Reference Long Base Line (LBL) and Supershort Base Line (SSBL) functionality Fully compatible with Cymbal® and HPR400 acoustic protocols Inbuilt sensor: Seatex MGC® R3 Operating range: 1 - 4000 m Range detection accuracy: < 20 cm Transducer beam width: ± 60° Heading accuracy (GNSS aided): 0.1° RMS (secant latitude) Dynamic accuracy roll & pitch: 0.01° RMS Length, diameter; weight (air): 663, 341 mm; 51 kg Supplied with 50 m or 70 m transducer cable Supplied with...

Open the catalog to page 4

Offshore and subsea equipment rental catalogue - 5

μPAP® 201-3-NEL System Portable Hydroacoustic Positioning Reference Operational modes: SSBL, LBL and data telemetry Fully compatible with all Cymbal® M channels Inbuilt motion sensor type / accuracy: Seatex MRU-3 / 0.08° Operating range: 1 - 995 m Angular accuracy: 0.25° Position accuracy: 0.45% (1 Sigma, SNR > 20dB rel. 1μPa in bandwidth) Data telemetry: up to 2,5kBit/s (application dependent) Transducer beam width: ± 80° Material, depth rating: Bronze/Stainless steel, up to 50 m Length, diameter; weight air/water: 400,190 mm; 17 kg/9 kg Supplied with 50 m or 70 m transducer cable Supplied...

Open the catalog to page 5

Offshore and subsea equipment rental catalogue - 6

ACOUSTIC POSITIONING – TRANSDUCERS HiPAP® 50x Sphere Transducer Standard HiPAP® 500/501/502 Transducer Both long base line (LBL) and supershort base line (SSBL) functionality Beam width: ± 100º Range detection accuracy: < 20 cm Transducer diameter: 392 mm Weight: Approx 60 kg cPAP® 34-30H Transducer 30 kHz band (MF) For use in Long Baseline (LBL) mode Aluminium housing, depth rated to 4000 m 30° horizontal beam pattern Connector type: Subconn MCBH4MSS Diameter, length, weight (air/water): 77, 213 mm, 1.54 kg/0.8 kg cPAP® 34-40V Transducer 30 kHz band (MF) Aluminium housing, depth rated to...

Open the catalog to page 6

Offshore and subsea equipment rental catalogue - 7

ACOUSTIC POSITIONING – CABLES HiPAP®351P / μPAP® 201 Transducer Cable 50 m or 70 m cable length Cable diameter: 12 mm Subsea plug diameter: Approx 44 mm Length, weight: 50 m, 10 kg

Open the catalog to page 7

Offshore and subsea equipment rental catalogue - 8

ACOUSTIC POSITIONING – HAIN SYSTEM Subsea Hydroacoustic Aided Inertial Navigation System HAIN System minus Inertial Measurement Unit The Subsea HAIN solution offers: • Improved position accuracy compared to acoustics only • Smoother position output compared to acoustics only • Higher position update rate • Continuous position output in event of acoustic dropout • Accurate heading, roll and pitch measurements • Increased QA and QC • Accurate velocity measurements. Compatible IMU types: Seatex MGC® R3, CDL MiniRLG/POS 2, Honeywell HG 9900, IXSEA IMU90/120 and TSS Orion. Subsea HAIN computer...

Open the catalog to page 8

Offshore and subsea equipment rental catalogue - 9

ACOUSTIC POSITIONING – HAIN POST-PROCESSING SOFTWARE NavLab Post-Processing Computer Installed with latest NavLab software Supplied with software licence dongle Used for post-processing of real time subsea HAIN data. Improves quality of the logged real-time subsea HAIN position. IMPORTANT NOTES: Doppler Velocity Log calibration is processed using the NavLab software. Without NavLab software available onboard the vessel, the system cannot be setup correctly as it will not be possible to do a correct Doppler Velocity Log calibration. NavLab: software package can also be used to improve the...

Open the catalog to page 9

Offshore and subsea equipment rental catalogue - 10

ACOUSTIC POSITIONING – ROV TRANSPONDERS (MST) MST 319/N ROV Positioning Transponder Small lightweight HPR series mini-transponder Fully compatible with HiPAP® and HPR systems Beamwidth: ± 90 degrees. Sensitivity 110/100 dB Switchable source level 192/188dB Rechargeable battery pack Polyurethane coated aluminium housing: depth rating to 1000 m Length, diameter; weight air/water: 328, 75 mm; 1.7/0.7 kg MST 324/N ROV Positioning Transponder Small lightweight HPR series mini-transponder Fully compatible with HiPAP® and HPR systems Beamwidth: ± 45 degrees. Sensitivity 98 dB Switchable source...

Open the catalog to page 10

Offshore and subsea equipment rental catalogue - 11

ACOUSTIC POSITIONING – ROV TRANSPONDERS (CNODE MINIS) cNODE® MiniS 34-180 ROV Positioning Transponder 30 kHz band (MF) Transponder / Responder Fully compatible with Cymbal® and HPR400 acoustic protocols SSBL / USBL and LBL positioning modes Beamwidth: ± 90 degrees Max source level: up to 188 dB Internal tilt sensor: ± 90 degrees Polyurethane coated aluminium housing, depth rating to 4000 m Operating range: 1000 m Rechargeable battery pack (Li-Ion) Battery Lifetime (quiescent): >30 days Battery Lifetime (operational): >2.5 days (Cymbal® (Low power, 1 sec update rate)) External power: 24 Vdc...

Open the catalog to page 11

Offshore and subsea equipment rental catalogue - 12

ACOUSTIC POSITIONING – CNODE MINI TRANSPONDERS cNODE® Mini 34-180 Positioning Transponder 30 kHz band (MF) Transponder / Responder Fully compatible with Cymbal® and HPR400 acoustic protocols SSBL / USBL and LBL positioning modes Beamwidth: ± 90 degrees Max source level: up to 190 dB Polyurethane coated aluminium housing, depth rating to 4000 m Rechargeable battery pack (NiMH) Battery Lifetime (fully charged): Quiescent 60 days, 1 ping per sec / max source level 100,000 replies External power: 15 ±10% Vdc, Min 300 W Length, diameter housing / transducer: 598, 85 / 88 mm Weight in air /...

Open the catalog to page 12