OE14-522
1Pages

Catalog excerpts

Product Specification oe14-522 color High Definition pan and tilt zoom (PATZ) camera oe14-522 Standard Features Electrical Horizontal Resolution Picture Elements Video Light Sensitivity (limiting) Scene Illumination (limiting) Sensor Type Signal to Noise Ratio Power Input Video Output Video Output Options Optical Output Option Standard Video Formats White Balance Back Light Compensation Control Electro-Magnetic Compatibility 800 TV Lines per picture height 1920 (H) x 1080 (V) 0.1 Lux (faceplate) 2 Lux assuming 100% scene reflectance 1 /3” CMOS sensor with colour mosaic filter >54dB weighted Constant Voltage 16V-24vdc - 1A max. HD Component Y/Pb/Pr, HD-SDI - coax or fibre optic Composite Video CWDM (Coarse Wave Division Multiplex) Wavelength options 1080i 50Hz or 60Hz Component, 720P 50Hz or 60Hz Component, PAL or NTSC Composite (Selected by IR or GUI) Switch between 3,200K, 5,600K and Auto using the Remote Control Switch on and off using the Remote Control Analogue, RS485, RS232 or Pelco-D EN61000-6.3 -2001 Emission/ EN61000-6-1 -2001 Immunity Environmental Water Depth Temperature • Unique 220° optical viewing angle • 10:1 optical zoom lens • Multi-standard video capability The Kongsberg Maritime OE14-522 Underwater HDTV PATZ Camera provides completely enclosed pan and tilt viewing angles, previously unobtainable, with its uniquely designed, precision machined, omega dome. The domed port and optical zoom provide a close-up inspection capability combined with the flexibility of a 10x magnification for standoff inspection. A smooth belt driven Pan and Tilt mechanism provides accurate and infinitely variable speed control head movement. The OE14-522 is a multi-standard camera with the ability to change video formats by IR remote control (RC) or by GUI. Video output is available as Component (Y, Pb, Pr) and HD-SDI on coax or fibre connectors (Single or Multi-mode). CWDM alternative wavelengths are also available. It is possible to easily switch to high resolution composite video output if HD is not required for certain tasks. Long line drive can be set by RC or GUI and allows the component signal to drive three matched coax cables with no degradation over three hundred metres. In addition to full control of the camera using the GUI, white balance can be set to 3,200K, 5,600K or to auto tracking and back light compensation can be switched on or off using the remote control. The Kongsberg Maritime IR remote control allows camera control setup. Camera control can be single wire (tri-state), RS485, RS232 or Pelco-D. Vibration Shock 4,500 metres (other options available) Operating -5°C to +40°C in Water Storage -20°C to +60°C 10g, 20-150Hz, 3-axes (non-operating) 30g peak, 25mS half-sine pulse Optical Standard Lens Iris Control Focus Control Zoom Angle of View in Water 5.1mm to 51mm, F1.8 Automatic, Manual using the GUI Front Port to infinity (wide angle) 800mm to infinity (narrow angle) 10x Optical 5.3° to 50° Diagonal 4.7° to 45° Horizontal 3° to 29° Vertical Mechanical Diameter Length Dome diameter Weight Standard Housing Connector HD-SDI Output 140 mm (Main Body) 226 mm (excl. connector) 170 mm 6.7 Kg in Air, 3 Kg in Water Titanium Alloy 6AL/4V ASTM B3 48 Burton 5506-2013 (Y, Pb, Pr), 5506-1508 (HD-SDI) Seacon Opticon Fibre DG O’Brien Coax Other connectors are available, including fibre or coax hybrid +44 (0)1224 226500 fax: +44 (0)1224 226501 Kongsberg Maritime reserves the right to amend specifications without notice. web: email: km.camsales.uk@kongsberg.com www.km.kongsberg.com/cameras Rev 08/12 tel: The inclusive Kongsberg Maritime Graphical User Interface (GUI) provides control functionality via the serial link.

Open the catalog to page 1

OE14-522
1Pages

Catalog excerpts

All Kongsberg Maritime catalogs and brochures

Archived catalogs

OE14-522 1Pages

Catalog excerpts

All Kongsberg Maritime catalogs and brochures

Archived catalogs

OE14-522
1Pages