Group: Kongsberg
Catalog excerpts
MGC® R2 A new family of products with motion sensing and gyro compass functionality is introduced. The MGC R2 product includes three Ring Laser Gyros and three linear accelerometers. Typical applications The MGC R2 product is a fully inertial navigation system (INS). It can output heading, roll, pitch, heave and position. Acceleration and velocity of linear motions, as well as angular rates, are output from the unit. The MGC R2 product outputs both processed and raw (gyro and accelerometer) sensor data. The MGC R2 product can be used as a stand-alone unit or as an IMU in other systems. The product is designed for high precision maritime applications such as offshore operations and seabed mapping. The product includes integrated navigation algorithms with input from a GNSS receiver for output of aided position and heading data. The proven PFreeHeave® algorithms are part of the navigation algorithms that enable down to 2 cm accuracy in delayed heave output and 5 cm accuracy in real-time heave output. The linear position and velocity measurements can be output in up to four different points on the vessel. The mounting bracket has been specially designed to enable easy alignment to the vessel axis or the axes of the system on which the unit shall measure the motion. This will ensure that the user gets precise measurements from the unit when it is installed. Function The MGC can operate in Gyrocompass mode and Integrated Navigation mode. In the Gyrocompass mode only, input of speed is required. In this mode the product will output heading, roll, pitch and heave accurately. In the Integrated Navigation mode, input of speed, position and PPS from a GNSS receiver is required (VTG, GGA, ZDA). In this mode the product will output heading, roll, pitch, heave and position. The unit is delivered with Windows based configuration and data presentation software, the MRC+. In this software vector arms from where the MGC is mounted to the center of gravity (CG) and two individually configurable monitoring points (MPs) can be defined. The heave measurements can be output in four different locations (the MGC itself, CG, MP1 and MP2) simultaneously on serial lines or Ethernet ports. A typical measurement point is the echo sounder transducer head. Variables output The MGC outputs heading, roll and pitch and corresponding angular rate vectors. The unit outputs relative (dynamic) heave position, velocity and acceleration. In the Integrated Navigation mode it also outputs position in north and east direction in addition to height above the ellipsoid. Digital I/O protocols MGC data is available through both Ethernet interface and serial lines enabling easy distribution of data to multiple users on board the vessel. Output protocols for commonly used survey equipment are available on two individually configurable serial lines and Ethernet/UDP.
Open the catalog to page 10.02° roll and pitch accuracy 0.1° heading accuracy GNSS aided Includes INS capability Outputs on RS-232, RS-422 and Ethernet High output data rate (200 Hz) Precise heave at long wave periods by use of PFreeHeave® algorithms Lever arm compensation to two individually configurable monitoring points • Small size a • Each MGC del • Selectable c configuration ORIENTATION OUTPUT Angular orientation range Resolution in all axes Accuracy roll, pitch Accuracy heading Accuracy heading (GNSS aided) Heading settling time to data available Heading settling time to full accuracy (typical) ±180° 0.001°...
Open the catalog to page 2All Kongsberg Maritime catalogs and brochures
-
EM 2040C MKII
2 Pages
-
AutoChief 600
2 Pages
-
DRS 500/IMS 500
2 Pages
-
Sounder
2 Pages
-
The Seapath family
12 Pages
-
mini MRU
2 Pages
-
Vessel motion monitoring
2 Pages
-
Company brochure
19 Pages
-
The MRU Family of Products
16 Pages
-
company borchure 2019
13 Pages
-
cNODE Mini transponder
4 Pages
-
DP alert system
2 Pages
-
Automatic DP alert
2 Pages
-
EELUME500
2 Pages
-
REMUS 6000
2 Pages
-
REMUS 600
2 Pages
-
Naval AUV product range
16 Pages
-
Hugin product specification
2 Pages
-
Munin AUV
2 Pages
-
SEAGLIDER
2 Pages
-
SEAGLIDER C2
2 Pages
-
SEAGLIDER M6
2 Pages
-
HISAS 1030
12 Pages
-
Vessel performance optimizer
20 Pages
-
K-Chief Marine automation system
16 Pages
-
DP Operator Station-650
2 Pages
-
Dynamic Positioning Logger
2 Pages
-
KM-workboats-folder
4 Pages
-
KM OSV brochure
8 Pages
-
HiPAP Family brochure
24 Pages
-
K-Nav navigation products
8 Pages
-
REMUS catalog
8 Pages
-
OE14-408
2 Pages
-
OE14-110/111
2 Pages
-
oe15-108/109
2 Pages
-
OE15-110/111
2 Pages
-
Hugin family of AUV's
28 Pages
-
Compact DP Operator Station
2 Pages
-
Motion Gyro Compass
2 Pages
-
Dynamic positioning systems
9 Pages
-
Kongsberg GlobalSim
5 Pages
-
K-POWER
16 Pages
-
K-CHIEF 700
9 Pages
-
K-CHIEF 600
4 Pages
-
OE14-372/373
1 Pages
-
OE14-364/365
1 Pages
-
OE14-308
1 Pages
-
OE14-208
1 Pages
-
oe15-358/359
1 Pages
-
OE15-100c/101c
1 Pages
-
OE13-124/125
2 Pages
-
OE14-522
1 Pages
-
oe14-502
1 Pages
-
K Thruster
2 Pages
-
K-Bridge autopilot
2 Pages
-
AIS 200
2 Pages
-
HPR 418
2 Pages
-
HPR 408S
2 Pages
-
RADius
2 Pages
-
DPC-3
2 Pages
-
DP Logger
2 Pages
-
K-Thrust TC
4 Pages
-
K-Thrust RCS
2 Pages
-
DPC-1
2 Pages
-
OS-650-DP
2 Pages
-
DARPS 116
2 Pages
-
Offshore Support Vessels
8 Pages
-
cC-1
2 Pages
-
cJoy WT
2 Pages
-
cJoy OT
2 Pages
-
cJoy Controller
2 Pages
-
cJoy PE
2 Pages
-
Know exactly where you stand
4 Pages
-
Offshore support vessels
8 Pages
-
REMUS 100
6 Pages
-
The hydrographic product family
32 Pages
-
AIS 200 BF
2 Pages
-
GeoSwath Plus
16 Pages
-
Engine Room Simulator
16 Pages
Archived catalogs
-
Pressure sensors
5 Pages
-
Signal converters
5 Pages
-
Products for workboats
4 Pages
-
Products for tankers
32 Pages
-
LNG vessel automation
12 Pages
-
Cruise
20 Pages
-
Yacht brochure
12 Pages
-
K-MASTER WORKSTATION
12 Pages
-
cJoy system
2 Pages
-
AIS 200 P
2 Pages