E7 Specification SYSTEM DIAGRAM Computer with SCS software Ship Gyro Compass KA-80 Antenna Control Unit ANT PWR ABOVE DECK Dish Diameter Antenna Dimension(1) Antenna Weight(2) Radome Material Frequency Antenna Gain** G/T iLNB(Intergrated LNB) Operating Platform Stabilization Inertial Sensor Skew Control Elevation Angle Azimuth Range Accuracy Ship Motion 61cm (24”) 69cm(H) x 67cm(D) 18kg Plastic TX : 14.0 ~ 14.5GHz RX : 10.95 ~ 12.75GHz Tx Gain : 36.4 dBi @ 14.25 GHz Rx Gain : 35.1 dBi @ 11.7 GHz 14.8dB/K @ 30deg. Elevation angle and 11.7GHz, Clear Sky BUC : 0.5W, 0.8W*(option) LNB : Linear / Internal PLL Gain : 60dB type 3 - Axis (Stabilized Azimuth, Elevation and Skew Angle) 3 - Axis Inverse Kinematics using Inertial Sensors (Attitude Heading Reference System) 2 - Axis Acceleration Sensors, 3 - Axis MEMS Solid State Rate Sensors. ± 130 +10 to +85 690 0.2 RMS, 0.4 Peak Pointing in specified ships motions. Ship Heading Motors Turning Rate GPS Temperature Humidity Antenna Input Power Roll : +/- 25 degrees at 8 sec periods Pitch : +/- 15 degrees at 6 sec periods Yaw : +/- 25 degrees at 8 sec periods With or Without NMEA Compass (without compass : 360 azimuth full range searching) Stepper motor Controlled by Micro Step Driver Up to 50 /sec Built-In GPS -20 C to 55 C Up to 100% @ 40 C , 5A 24V DELOW DECK ACU Size External I/O Gyro Interface Output power PACKING Size Gross Weight Packed by *Warranty Information KNS offers 2-year parts, 1-year on board labour warranty for the SuperTrack series Hwaam-dong 59-5, Yuseong-gu, Daejeon 305-348, South Korea | Tel +82 42.932.0351 Fax +82 42.932.0353 www.kns-kr.com