KMC3
40Pages

{{requestButtons}}

Catalog excerpts

KMC3 - 1

Multi-Media Receiver KMC3 Owner’s Manual | English Manual del Propietario | Español KMC3 Receptor Multi-Media Benutzerhandbuch | Deutsch KMC3 Multi-Media-Receiver Manuel d’utilisation | Française KMC3 Multi-Media Recei

Open the catalog to page 1
KMC3 - 2

FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful...

Open the catalog to page 2
KMC3 - 3

print mounting hole cutout template at 8.5”x11” in “Portrait” and “Actual Size” It is recommended you mark the screw holes for Surface Mounting after making the mounting hole. Imprima la plantilla de recorte del orificio de montaje en tamaño 8.5 x 11 pulgadas, con las opciones de configuración “Vertical” y “Tamaño real”. imprimer le patron de découpe du trou de fixation au format 8,5”x11” en mode « Portrait » et « Taille réelle ». Drucken Sie die Ausschnittsschablone für das Montageloch bei 8,5” x 11” im Hochformat mit der Einstellung „Tatsächliche Größe“ aus. mounting hole cutout template:...

Open the catalog to page 3
KMC3 - 4

print mounting hole cutout template at 8.5”x11” in “Portrait” and “Actual Size” It is recommended you mark the screw holes for Surface Mounting after making the mounting hole. Imprima la plantilla de recorte del orificio de montaje en tamaño 8.5 x 11 pulgadas, con las opciones de configuración “Vertical” y “Tamaño real”. imprimer le patron de découpe du trou de fixation au format 8,5”x11” en mode « Portrait » et « Taille réelle ». Drucken Sie die Ausschnittsschablone für das Montageloch bei 8,5” x 11” im Hochformat mit der Einstellung „Tatsächliche Größe“ aus. mounting hole cutout template:...

Open the catalog to page 4
KMC3 - 5

Specs 5 Overview 6 Installation 7 Operation 10 Troubleshooting 12 Warranty 37 Especificaciones 13 Descripción general 14 Instalación 15 Funcionamiento 18 Resolución de problemas 20 Garantía 37 Caractéristiques 21 Présentation 22 Installation 23 Utilisation 26 Dépannage 28 Garantie 37 Spezifikationen 29 Übersicht 30 Installation 31 Betrieb 34 Fehlerbehebung 36 Garant

Open the catalog to page 5
KMC3 - 6

SPECIFICATIONS Model Power Output @ 14.4V, 4Ω stereo, <10% THD+N Input Sensitivity USB Compatible File System Outer Trim Ring Dimensions [in, cm] Protrusion From Mounting Surface [in, cm] Total Mounting Depth [in, cm] Be careful not to drill into wiring or vehicle mechanisms. You are solely responsible for securely mounting the KMC3 Media Center. See page 2–3 for mounting hole cutout template. Authorized KICKER Dealer: Purchase Date: Serial Number: Before installation, you may wish to plan your placement of the USB and Auxiliary inputs, and the optional KRC12 remote (sold separately), for...

Open the catalog to page 6
KMC3 - 7

OVERVIEW NOTE: Use short and long presses to operate. Some input sources do not support all functions. •change volume/value (scroll) •next/previous (scroll) •select (press) •enter audio settings menu (press & hold) •digital display •power on/off (press & hold) •change source (press) •seek up (press) •next track (press) •fast forward/manual tuning (press & hold) •enter settings menu •play/pause •mute/unmute •preset menu (AM-FM – press) •track selection (USB – press) •save preset menu (AM-FM – press & hold) •RND/RPT (USB – press & hold) •seek down (press) •previous track (pre

Open the catalog to page 7
KMC3 - 8

LINE OUT wired remote (sold separately) fuse 15A ATM radio antenna positive negative ground remote auto-turn on output (to amplifiers) battery rear right rear left front right front left illumination/dimmer (day/night mode when wired to vehicle lighting)

Open the catalog to page 8
KMC3 - 9

Surface Mounting 1. Secure the KMC3 to the surface on which you’re mounting using the supplied screws. 2. Push the faceplate onto the KMC3 until it locks into place.

Open the catalog to page 9
KMC3 - 10

Bracket Mounting 1. Attach threaded bolts to the back of the KMC3 2. Position the mounting bracket over the bolts. 3. Place washers over bolts and securely attach nuts. 4. Depending on the size of your mounting baffle, you may need to snap off one or more of the metal tabs from the mounting bracket to accomodate installation. 9

Open the catalog to page 10
KMC3 - 11

OPERATION Playback Use the SOURCE button to choose the input source for the KMC3: FM, AM, Bluetooth, USB, or AUX. When Bluetooth is selected as the input source, the KMC3 will automatically enter Bluetooth pairing mode if there is no previous Bluetooth connection, identifying as “KMC KICKER” to your audio device. You may also select “BT PAIR” from the menu to enter pairing mode. While in pairing mode, the Bluetooth icon will flash. When successfully paired, the Bluetooth icon will become solid. The USB input source is only available when there is a USB device connected. The KMC3 will...

Open the catalog to page 11
KMC3 - 12

Audio Settings Press and hold the VOLUME KNOB to enter the Audio Settings menu. The available audio settings are: Bass, Treble, Balance, Fader, and EQ. Use the VOLUME KNOB to change the available values for each setting, then press it to confirm the settings. Changes to the Bass, Treble, and EQ settings are applied to the RCA outputs. Bass - adjust the bass level from -7 to +7 Treble - adjust the treble level from -7 to +7 Balance - adjust the balance from Left 7 to Right 7 Fader - adjust the fader from Front 7 to Rear 7 EQ - select between EQ presets: USER, FLAT, CLASS, POP, and ROCK...

Open the catalog to page 12

All Kicker catalogs and brochures

  1. 45KM102

    1 Pages

  2. KMC2

    36 Pages

  3. KMC4

    36 Pages

  4. KMC5

    48 Pages