PAH40

PAH40
1 / 26 PagesView full catalog

PAH40

Product catalog summary
Overview: The Keco 50 Series diaphragm pump is a versatile and durable pump initially designed for marine applications but has proven effective in consumer and industrial markets. It is suitable for various applications including flood prevention, pool/pond pumping, spill clean-up, and septic tank pump-out. The pump can handle solids up to 1.5 inches in diameter and can run dry continuously without damage.
Specifications: The standard model includes a 0.5-HP 115/230-Volt electric motor with a 10-foot electrical cord and grounded plug. The pump is constructed with 0.5-inch stainless steel nuts and bolts and features a triple-layer coating for durability. It is equipped with encapsulated valve packs for tight seals and impressive suction.
Options: The 50 Series pump offers various options to meet different needs, including:
  • Engine Options: Briggs & Stratton 3.5-HP, Honda 4-HP, 0.5-HP Explosion-Proof, 0.75-HP 115/230 Volt, 0.75-HP Explosion-Proof.
  • Control Options: Push to Start with Timer, On/Off Switch, Explosion-Proof Push to Start with Timer, Explosion-Proof On/Off Switch, Explosion-Proof Key On/Off.
  • Mobility Options: The pump can be mounted on a rugged steel cart for easy movement, and handles can be installed for portability.
Design and Materials: The pump is designed for handling viscous materials, sanitary waste, slurries, and solids up to 1.5 inches in diameter. It features an 8-inch neoprene diaphragm reinforced with 2-ply nylon, supported by cast aluminum plates. The motor/engine drives an eccentric connected to a stainless steel drive rod. The pump body is made of marine-grade cast aluminum, and all exposed surfaces are coated with zinc, epoxy, and urethane for corrosion resistance.
Performance: The pump is capable of achieving 18 inches Hg / 13 PSI with a flow rate of up to 30 GPM. It is self-priming and can handle a wide variety of liquids, including mud and concrete slurry, without damage.
Applications: The 50 Series pump is suitable for marine, personal, and industrial applications, including bilge pump-out, holding tank pump-out, water evacuation, oil spill clean-up, utility pumping, liquid transfer, abrasive pumping, sewage collection, and manhole evacuation.
Conclusion: Keco's 50 Series diaphragm pump is a reliable, adaptable, and multi-purpose solution for various pumping needs, offering a range of options to suit different preferences and applications.
Technical Drawing Overview: This document is a technical drawing and specification sheet for various components of a pump system produced by Keco Pump and Equipment. It includes detailed information on dimensions, materials, and assembly instructions for different parts of the pump system.
Specifications:
  • Dimensions are provided in inches with tolerances specified for fractional, one-place decimal, two-place decimal, three-place decimal, and angular measurements.
  • The document is proprietary and confidential, indicating that reproduction without permission is prohibited.
Components and Parts List:
  • The document lists various parts such as Pump Bowl, Valve Seating Plate, Valve, Square Center Gasket, Suction Elbow, Suction Hose Adapter, Discharge Elbow, and Retaining Ring.
  • Each part is identified by a part number and description, along with the quantity required.
Assembly Instructions:
  • Exploded views and assembly instructions are provided for different bowls and hardware kits.
  • Stainless steel fasteners are included but not depicted in the drawings.
Procedures:
  • Instructions for suction and discharge valve replacement are provided, emphasizing the importance of not over-tightening valves or gaskets.
  • Torque specifications are given, and the document advises ensuring that aluminum pump flanges are smooth and clean before installation.
Important Notes:
  • Do not over-tighten valves or gaskets; torque specification is 55”/lbs or 4.5’/lbs.
  • Ensure aluminum pump flanges are smooth and clean; if pitted or corroded, use a steel brush or grinding wheel to clean.
See more

Catalog excerpts

PAH40-1

Jr. ON A CART Designed initially for marine applications, the 50 Series pump has proven itself effective in the consumer/industrial market. The 50 Series can be used for flood prevention, pool/pond pump, spill clean-up, and septic tank pumpout. The 50 Series can pass solids up to 1.5” in diameter, and can run dry continuously without damage. Standard equipment includes .5-HP 115/230-Volt electric motor with 10Ft electrical cord and grounded plug. Whatever you applications demands, Keco’s 50 Series diaphragm pump can facilitate your needs. OPTIONS ENGINE OPTIONS • Briggs & Stratton 3.5-HP • Honda 4-HP CONTROL OPTIONS • Push to Start With Timer • On/Off Switch MOTOR OPTIONS • • • • • Explosion-Proof Push to Start W/Timer OPTIONAL COVER • Explosion-Proof On/Off Switch

 Open the catalog to page 1
PAH40-2

KECO pump and equipment ® DIAPHRAGM PUMPS 50 SERIES Keco strives to build the best, longest lasting, and most effective diaphragm pump on the market. Keco’s 50 Series pump, is a rugged, durable, and multi-purpose diaphragm pump. Also known as the “Junior,” this pump is built for a variety of pumping applications. Assembled using all .5” stainless steel nuts and bolts, and treated with a triple layer coating, the Model 50 is built to last! New Encapsulated valves packs provide tight seals and impressive suction with every stroke. If you demand a versatile, all-purpose diaphragm pump, look no further...

 Open the catalog to page 2
PAH40-3

DIAPHRAGM PUMPS CHOOSE THE PUMP THAT FITS YOUR NEEDS! HOW IT WORKS c s Diaphragm Pumps are one of the oldest pumping techniques employed by man. Mechanically similar to a plunger, the diaphragm pump bowl is filled when the diaphragm rises, and cleared when the diaphragm compresses. The reciprocating action causes the suction/discharge valve to fully open and close. Oversized inlet/outlets allow Keco’s diaphragm pumps to pass 1.5" solids. This simple and effective pump has proven to be a reliable and durable workhorse throughout the world's busiest marinas. | COMPARE IT TO OTHERS | Keco’s self-priming...

 Open the catalog to page 3
PAH40-4

Keco developed a pump that would stand up to a wide variety of liquids, and be able to handle the most severe environmental conditions imaginable. Although initially targeting marine applications, Keco’s diaphragm pump has proven itself effective as a versatile multi-purpose pump. Keco’s diaphragm pump has the ability to pump everything from mud to concrete slurry. The self-priming diaphragm pump is able to run dry without damage. Keco offers a variety of pump options to meet your needs. Please allow our staff to assist you in determining the most effective options, which are right for you. bilge...

 Open the catalog to page 4
PAH40-5

Model 40 - Portable Design Considerations Capacity & Dimensions The pump shall be designed for viscous material handling sanitary waste, slurries and solids up to 1%” spherical diameter. The 8” diaphragm to be of Neoprene** reinforced with 2-ply nylon. Two cast aluminum plates support the diaphragm. The motor/engine shall drive an eccentric connected to a stainless steel drive rod by a rod end bearing assembly. The rod end bearing shall have an oil filled sintered steel ball and be equipped with a lubricating fitting. Weighted encapsulated inlet and discharge valves are replaceable. Valves seat...

 Open the catalog to page 5
PAH40-6

FRONT NOTES: 3/4 HP TEFC MOTOR DEPICTED ALTERNATE MOTORS AVAILABLE ORIENTATION 1 SHOWN THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF KECO PUMP AND EQUIPMENT. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF KECO PUMP AND EQUIPMENT IS PROHIBITED. UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES TOLERANCES: FRACTIONAL 1/32 ONE PLACE DECIMAL .1 TWO PLACE DECIMAL .03 THREE PLACE DECIMAL .020 ANGULAR .5 DRAWN REVISION # KECO PUMP AND EQUIPMENT WWW.PUMPAHEAD.COM PART NUMBER - TITLE 50 E SERIES SINGLE DIAPHRAGM VIEW 1

 Open the catalog to page 6
PAH40-7

FRONT NOTES: 3/4 HP TEFC MOTOR DEPICTED ALTERNATE MOTORS AVAILABLE ORIENTATION 3 SHOWN UNLESS OTHERWISE SPECIFIED: THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF KECO PUMP AND EQUIPMENT. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF KECO PUMP AND EQUIPMENT IS PROHIBITED. DIMENSIONS ARE IN INCHES TOLERANCES: FRACTIONAL ± 1/32 ONE PLACE DECIMAL ±.l TWO PLACE DECIMAL .03 THREE PLACE DECIMAL .020 ANGULAR ±.5 KECO PUMP AND EQUIPMENT ECO WWW.PUMPAHEAD.COM DATE: 5/5/2015 PART NUMBER - TITLE 50 E SERIES SINGLE DIAPHRAGM VIEW 3 DIMENSION: INCHES / (XX) MM...

 Open the catalog to page 7
PAH40-8

NOTES: DRAWN PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF KECO PUMP AND EQUIPMENT. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF KECO PUMP AND EQUIPMENT IS PROHIBITED. UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES TOLERANCES: FRACTIONAL ± 1/32 ONE PLACE DECIMAL ±.1 TWO PLACE DECIMAL .03 THREE PLACE DECIMAL .020 ANGULAR ±.5 KECO PUMP AND EQUIPMENT ECO WWW.PUMPAHEAD.COM PART NUMBER - TITLE PUMP BOWL ORIENTATIONS DIMENSION: INCHES / (XX) MM SCALE:1:10 SHEET 2 OF 5

 Open the catalog to page 8
PAH40-9

MOTOR NOTES: MAIN COMPONENTS EXPLODED VIEW DRAWN PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF KECO PUMP AND EQUIPMENT. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF KECO PUMP AND EQUIPMENT IS PROHIBITED. UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES TOLERANCES: FRACTIONAL ± 1/32 ONE PLACE DECIMAL ±.1 TWO PLACE DECIMAL .03 THREE PLACE DECIMAL .020 ANGULAR ±.5 KECO PUMP AND EQUIPMENT ECO WWW.PUMPAHEAD.COM DATE: 5/5/2015 PART NUMBER - TITLE 50 E SERIES SINGLE DIAPHRAGM MATERIAL DIMENSION: INCHES / (XX) MM SCALE:...

 Open the catalog to page 9
PAH40-10

NOTES: DIAPHRAGM ROD-CAMBLOCK -GEARBOX-MOTOR EXPLODED VIEW PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF KECO PUMP AND EQUIPMENT. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF KECO PUMP AND EQUIPMENT IS PROHIBITED. UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES TOLERANCES: FRACTIONAL ± 1/32 ONE PLACE DECIMAL ±.1 TWO PLACE DECIMAL .03 THREE PLACE DECIMAL .020 ANGULAR ±.5 KECO PUMP AND EQUIPMENT ECO WWW.PUMPAHEAD.COM DATE: 5/5/2015 PART NUMBER - TITLE 50 E SERIES SINGLE DIAPHRAGM MATERIAL DIMENSION: INCHES / (XX)...

 Open the catalog to page 10

All Keco Pump & Equipment catalogs and brochures

  1. PAH50

    24  Pages

  2. PAH560

    12  Pages

  3. PER910

    8  Pages

  4. PAH510

    11  Pages

  5. PAH425

    1  Page

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.