*mynauticexpo

terminals-n2

Product catalog summary

Product Specifications

The document provides detailed specifications for a series of flexible terminals (Flex Terminals) produced by Brdr. Markussens Metalvarefabrik A/S. Each product is identified by a part number (e.g., NE 14 F, NE 16 F) and includes dimensional data, weight, wire size compatibility, swaging die requirements, and required pressing pressure.

Dimensions and Parameters

Dimensions A to F and diameter (Ø) are given in millimeters for each terminal type.
After pressing length is specified in millimeters.
Weight is provided in kilograms.
Wire size compatibility is indicated (e.g., 14, 16, 18, 20, 22, 24).
Swaging dies required are specified by die type (e.g., DIE-NE-28, DIE-NE-36).
Required pressing pressure is given in tons (e.g., 250, 300).

Key Data Extracted from Table

Part No.	Dimensions (A-F, Ø mm)	After Pressing Length (mm)	Weight (kg)	Wire Size	Swaging Die	Required Pressure (Ton)
NE 14 F	A=42, B=75, C=123, D=32.0, E=50, F=70, Ø=14.5	28	1.2	14	DIE-NE-28	250
NE 16 F	A=42, B=75, C=133, D=32.0, E=50, F=80, Ø=16.5	28	1.2	16	DIE-NE-28	250
NE 18 F	A=42, B=75, C=143, D=32.0, E=50, F=90, Ø=18.5	28	1.2	18	DIE-NE-28	250
NE 20 F	A=56, B=100, C=175, D=42.5, E=57, F=100, Ø=20.5	36	3.1	20	DIE-NE-36	300
NE 22 F	A=56, B=100, C=185, D=42.5, E=57, F=110, Ø=22.5	36	3.1	22	DIE-NE-36	300
NE 24 F	A=56, B=100, C=195, D=42.5, E=57, F=120, Ø=24.5	36	3.1	24	DIE-NE-36	300

Procedures and Recommendations

The document implies the use of specific swaging dies corresponding to the wire size and terminal type to ensure proper pressing. The required pressing pressure must be applied according to the terminal specifications to guarantee secure and reliable connections.

Manufacturer Information

Brdr. Markussens Metalvarefabrik A/S is located at Sverigesvej 5-11, 7480 Vildbjerg, Denmark. Contact details include telephone +45 97 13 12 66, fax +45 97 13 12 13, and email [email protected].

Summary of Critical Information

Use the correct swaging die (DIE-NE-28 or DIE-NE-36) based on terminal size.
Apply the specified pressing pressure (250 or 300 tons) for effective terminal crimping.
Dimensions and weights vary by terminal size and must be adhered to for compatibility.
Wire size compatibility is critical for selecting the appropriate terminal.