Catalogs >
JRC Europe >
JMA-9172-SA Solid State Radar

JMA-9172-SA Solid State Radar
6Pages

Catalog excerpts

JMA-9172-SA Solid State Radar RMS – JRC’s new S-band Solid State radar represents the next generation of unparalleled performance Target detection unlike anything before No magnetron ensures low maintenance cost First class clutter processing Constaview™ and TEF™ as standard Free from tuning and pre-heating since 1915

Open the catalog to page 1

JMA-9172-SA – features Features JRC's new IMO approved JMA-9172-SA, S-band Solid State radar, represents a new generation of marine radars, utilizing advanced signal processing technology to display targets with high accuracy while using a stabilized high-power solid state transceiver. The advanced radar functions and operation are based on JRC's successful JMA-9100 radar series. Pedestal Transceiver Processor Moving target detection This solid state radar will easily detect moving targets in clutter compared to conventional radars. A new Doppler filter at the heart of the solid state radar...

Open the catalog to page 2

JMA-9172-SA – advanced technology Why 30kW & 250W appear equal? Solid State time Advanced signal processing in FM pulse radar 250 W power TX energy power 30 kW Traditional signal processing TX energy Conventional time High power, short pulse Low power, long pulse Advanced signal processing JRC's new solid state architecture integrates an advanced signal processing technology that detects and displays information at a new level. These dedicated signal processing circuits are producing higher capability than a magnetron radar, and greatly exceeding detection performance. The solid state has a...

Open the catalog to page 3

JMA-9172-SA – unique functions Constaview™ The second generation and patented Constaview™ is realized through the use of three high-speed processors (in-house Tornado™ technology). All information gathered by the radar is fully processed within a few milliseconds before being displayed. A smooth image rotation is generated when sailing in Head-up mode. When changing to North-up, the new radar image is displayed without any delay caused by the scanner rotation. Constaview™ Conventional Radar sweep Redrawing True Trails Constaview™ refreshes the image every 16mS. Despite heading changes...

Open the catalog to page 4

JMA-9172-SA – size and weight Stand alone version NDC-9170 Weight 130 kg 23” 325 mm 200 mm 1145 mm 575 mm 700 mm 335 mm 515 mm Desktop version NWZ-178 Weight 25 kg 23” 505 mm 298 mm 608 mm 463 mm NCE-5322 Weight 3,5 kg 210 mm 52 mm 400 mm NDC-1478 Weight 30 kg 471 mm 479 mm 363 mm Solid state S-band scanner NKE-1532 Weight 170 kg Swing circle 4000 mm 320 mm 660 mm

Open the catalog to page 5

JMA-9172-SA – specifications JMA-9172-SA √ JMA-9172-SA IMO approved Frequency S-band (2-unit type) Performance monitor Integrated Antenna length 12 ft (3.66 m) Transmitting power 250 W Transmitting frequency P0N (3040 MHz), Q0N (3060 MHz ±4 MHz) Beam width 3 db Horizontal 1.9°, vertical 25° Rotation speed 24 rpm Pulse width 0.07 µs - 18.3 µs Duplexer Circulator + diode limiter Range scale 0.125/0.25/0.5/0.75/1.5/3/6/12/24/48/96 NM Motor Brushless Signal processing Pulse compression Doppler processing 32 filters Display 1280 by 1024 pixels (≥ 320 mm PPI color raster scan) Bearing indication...

Open the catalog to page 6

JMA-9172-SA Solid State Radar 6Pages

Catalog excerpts

All JRC Europe catalogs and brochures

JMA-9172-SA Solid State Radar
6Pages