TDS - Mammut Primer - English
3Pages

{{requestButtons}}

Catalog excerpts

TDS - Mammut Primer - English - 1

Technical Data Mammut Primer Product description Mammut Primer is a high build urethane alkyd based primer. This product is part of a complete system which is certified not to spread surface flames. Recommended use Steel structures for general industrial purpose in combination with an alkyd system. Film thickness and spreading rate Minimum Film thickness, dry (µm) Film thickness, wet (µm) Theoretical spreading rate (m²/l) Maximum 60 120 8,3 100 200 5 Typical 80 160 6,3 Physical properties Colour Grey, White Solids (vol %)* 50 ± 2 Flash point 36ºC ± 2 (Setaflash) VOC 380 gms/ltr UK-PG6/23(97). Appendix 3 Gloss Flat Water resistance Fair Flexibility Good *Measured according to ISO 3233:1998 (E) Surface preparation All surfaces should be clean, dry and free from contamination. The surface should be assessed and treated in accordance with ISO 8504. Bare steel Cleanliness: Blast-cleaning to Sa 2½ (ISO-8501-1:2007). Power tool cleaning to min. St 2 (ISO 8501-1:2007) may be acceptable, subject to exposure conditions. Mammut Primer Page 1 of 3

Open the catalog to page 1
TDS - Mammut Primer - English - 2

Shopprimed steel Clean, dry and undamaged approved shopprimer. Coated surfaces Clean, dry and undamaged compatible primer. Contact your local Jotun office for more information. Other surfaces The coating may be used on other substrates. Please contact your local Jotun office for more information. Condition during application The temperature of the substrate should be minimum 3ºC above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is usually required in confined areas to ensure correct drying. Application methods Spray...

Open the catalog to page 2
TDS - Mammut Primer - English - 3

The given data must be considered as guidelines only. The actual drying time/times before recoating may be shorter or longer, depending on film thickness, ventilation, humidity, underlying paint system, requirement for early handling and mechanical strength etc. A complete system can be described on a system sheet, where all parameters and special conditions could be included. Typical paint system Mammut Primer Mammut Topcoat 1 x 80 µm 1 x 80 µm (Dry Film Thickness) (Dry Film Thickness) Other systems may be specified, depending on area of use Storage The product must be stored in accordance...

Open the catalog to page 3

All JOTUN catalogs and brochures

  1. Megafiller

    5 Pages

  2. Hardtop XP

    6 Pages

  3. SeaForce 30

    5 Pages

  4. SeaForce 60

    5 Pages

  5. SeaForce 90

    5 Pages

  6. Pioner

    4 Pages

  7. Jota Armour

    5 Pages

  8. Penguard FC

    5 Pages

  9. Pilot II

    5 Pages

  10. Tankguard DW

    6 Pages

  11. AntiPest

    5 Pages

  12. Racing

    3 Pages

  13. Megafiller

    5 Pages

  14. Osmoshell

    4 Pages

  15. MegaGloss HG

    5 Pages

  16. TopGloss

    5 Pages

  17. Megacote

    5 Pages

  18. Megasealer

    5 Pages

  19. SeaMate M

    4 Pages

  20. Hardtop AX

    5 Pages

  21. EasyPrimer

    4 Pages

  22. Marathon IQ2

    5 Pages

  23. SeaQuest

    5 Pages

  24. Hardtop One

    9 Pages

  25. Alkydprimer

    5 Pages

  26. EasyGloss

    3 Pages

  27. Aluflex

    3 Pages

  28. JOTAMASTIC

    20 Pages