HIGH PRESSURE CIRCULATION PUMP CM95HP A MAGNETIC DRIVE SEAL-LESS PUMP WITH BRUSHLESS ELECTRIC MOTOR 25 OR 38 MM PORTS, DESIGNED FOR A NOMINAL FLOW OF 65 LITRES / MIN @ 0.8 BAR The CM95HP is a high-pressure, magnetically driven (seal-less), circulation pump with a DC motor designed for a 40 000 hour service life. The brushless motor of the CM95HP eliminates brush maintenance and related motor failures. TYPICAL APPLICATIONS The CM95HP pump generates high flow, at a high pressure, for such demanding applications as cooling of electric circuits and batteries used on hybrid and full-electric buses, trains and other commercial vehicles. The durable design will also provide dependability on physically demanding applications such as agricultural equipment, construction and mining vehicles as well as on and off-road vehicles. DURABILITY The CM95HP comes with IP6K9K and IP67 ratings to ensure the highest degree of reliability in the most demanding environmental conditions. These IP ratings ensure the pump to be waterproof, dustproof and to withstand high-pressure/steam jet cleaning. The pump is also tested and approved to withstand shock and vibrations. The cast aluminium pump housing is available in 2 port diameters; 25mm (1”) and 38mm (1 ½”). The metal design of the CM95HP also allows us to meet the flammability rating UL 94 Class V0. TEMPERATURE RANGE The CM95HP will withstand ambient temperatures from -40° to +85°C (-40° to +185°F). FEATURES & BENEFITS • Nominal flow @ 0.8 bar 60 l/min (15.9 GPM) with connection ∅25 mm (1") 65 l/min (17.2 GPM) with connection ∅38 mm (1 ½") • Designed for ambient temperatures of -40°C to +85°C at at liquid temperature +100°C (-40°F to +185°F at liquid temp +212°F) • Magnetic drive (no shaft seal/ mechanical seal) • Designed for continuous duty • Long service life • Wide temperature range • Speed control and stand alone applications • Built-in thermal overload protection • Derating, automatic speed control at overheating • Motor running status and fault status out via LIN-bus • Reversed polarity protection • Low voltage protection • Dry run protection • Current limitation • Voltage transients protection • Enclosure; IP6K9K and IP67 SPEED CONTROL The CM95HP is designed for speed control with PWM (Puls Width Modulation) control and offers security features such as; built-in thermal overload protection, built-in temperature limitation function, reversed polarity protection, voltage transients protection, low voltage protection, internal current limitation and

CM95HP – High Pressure Centrifugal Pump with Magnetic Transmission powered by a Brushless DC Electromotor Technical specifications: Capacity: 60 l/min (15.9GPM) at 0.8 bar (26.75 ftH2O) 38 mm (1 ½") port 65 l/min (17.2 GPM) at 0.8 bar (26.75 ftH2O) System pressure: -0.2 to +2.5 bar at 100°C (+212°F) Liquid: Water/glycol mixture; max. 60% glycol Motor service life: The motor is designed for a service life of 40.000 hours at nominal voltage and ambient temperature of +40°C (+104°F) Motor, voltage: Nominal 27.2 V DC for use between16-32 V DC Motor: Enclosed (as per IP6K9K and IP67) permanent magnet,...