Catalogs >
Johnson Pump Marine >
2021 CM90 BL Heavy-duty Circulating pump with Brushless electric motor (GB)

2021 CM90 BL Heavy-duty Circulating pump with Brushless electric motor (GB)
2Pages

Catalog excerpts

2021 CM90 BL Heavy-duty Circulating pump with Brushless electric motor (GB) - 1

Heavy-duty Circulation Pump A MAGNETIC DRIVE SEAL-LESS PUMP WITH BRUSHLESS ELECTRIC MOTOR 20 OR 38 MM PORTS, DESIGNED FOR A MAXIMUM FLOW OF 55 OR 115 LITRES / MIN The high performance CM90 BL circulation pump has been designed for a significantly longer service life, compared to pumps with a traditional brush motor. The pump is electronically controlled and fitted with a brushless electric motor with fewer wear parts. The CM90 BL is developed primarily for heating and cooling applications in busses, trains and boats, suitable for circulation of gycol mixture or fresh water; but it is much more. In closed systems or wherever else self-priming is not required, the CM90 BL is an all-round pump that distinguishes itself for its Features & Benefits dependability, capacity and long service life. • Maximum flow @ 0.1 bar 55 l/min (14.5 GPM) with connection ∅20 mm (¾") 115 l/min (30.4 GPM) with connection ∅38 mm (1 ½") The CM90 BL pump has a magnetic drive, which means that no • Ball bearing brushless motor - Enclosure IP67 shaft seal is necessary, as the motor shaft does not penetrate the pump house. With no mechanical seal, longer service life is • Designed for liquid temperatures of -40 °C to +100 °C (-40 °F to +212 °F) • Seal-less magnetic drive Heat flanges on both the motor and the pump also increase • Specifically engineered for continuous operation service life as they dissipate heat from the unit, which can pump • Extended service life liquids efficiently at a very wide range of temperatures. The • Easily maintained CM90 BL also features integral thermal overload protection and is • Equipped with heat flanges for improved cooling EMC approved according to EN 55014 standards. • Built-in thermal overload protection The CM90 BL magnetic driven centrifugal pump combines a high flow rate with very low electricity consumption, making it ideal for • Universal mounting bracket for easy installation vehicular heating and cooling systems. • Industry standard ports With the high performance of the CM90 BL you also get a smooth • Complies with Recreational Craft Directive 94/25/ EEC: (ISO 8846), (ISO 10133) design with almost identical dimensions as the original CM90. This makes it easy to install on any flat horizontal or vertical surface.

Open the catalog to page 1

2021 CM90 BL Heavy-duty Circulating pump with Brushless electric motor (GB) - 2

CM90 BL – Brushless DC electromotor powered, centrifugal pump with magnetic transmission The CM90 BL has been designed to circulate water or a water/antifreeze mixture in the heating systems of busses, trains and boats. Technical specifications: System pressure: water/glycol mixture; max. 60% glycol Motor service life: More than 20,000 hours at nominal voltage (and 30°C ambient temperature) 40,000 start/stops. Interchangeable motor. Motor, voltage: Nominal 13.6 V DC for use between 10-16 V Nominal 27.2 V DC for use between 20-32 V Motor: enclosed (as per IP67) permanent magnet, ball bearing...

Open the catalog to page 2