*mynauticexpo

MagnetTrans

Product catalog summary

Overview
The document provides technical specifications for a magnetic sensor developed by JDC Electronic SA, designed to measure the velocity of gases and fluids, as well as the rotation of shafts equipped with a magnet. The sensor is compatible with JDC's propellers and other magnet-equipped propellers.

Technical Data

Wiring: Green wire for output signal, white wire for GND, and brown wire for VDC.
Versions: MT-W for WindSENS 12, 20, and 60; MT-F for WindSENS 3D.
Specifications: Voltage range of 2.7 to 5.5 VDC, current consumption of 10 µA, output signal from GND to VCC, and RPM frequency range from 1Hz to 500Hz.
Sensor Size: MT-W is ø 10mm x 48mm, MT-F is ø 8mm x 65mm, with a cable length of 2m.
Sensitivity: Ranges from 10mm to 50mm.

WindSENS Types and Specifications

WindSENS 20: Air propeller with ø20mm, sensitivity of less than 1 m/s with ±2% accuracy, temperature range from -50°C to +100°C, and an error of ±20° resulting in ±3%.
WindSENS 12: Air propeller with ø12mm, similar specifications to WindSENS 20.
WindSENS 60: Water propeller with ø60mm, sensitivity of less than 0.1 m/s, temperature range from -50°C to +60°C.
WindSENS 3D: Multi-axis turbine for permanent installation, sensitivity of less than 2 m/s with ±3% accuracy, temperature range from -50°C to +60°C.

Additional Features

Small size and low power consumption.
Several propellers available for different applications.
Easy to use and adaptable to various setups.

Catalog excerpts

Magnetic Sensor To measure the velocity of gases and fluids as well as any shaft in rotation with a magnet Small Several propellers available for gases and fluids Low consumption Easy to use Specially developed for measuring the velocity of gases and fluids. That sensor can be adapted to all JDC's propellers and also to all other propellers equipped with a magnet. Technical data Specifications Green wire Output signal White wire Brown wire Current consumption Output signal RPM – Frequency Sensor size Black polycarbonate tube Cable length Available propellers Error Temperature range Air propeller ø20mm (Clearance hole ø33mm) Air propeller ø12mm (Clearance hole ø18mm) Multi-axis turbine for permanent installation with screw mounting Magnet to attach on all rotary carriers Depending on the material of the magnet Ratio frequency / speed reserves the right to change specifications at any time without notice JDC Electronic SA – Avenue des Sports 42 – CH-1400 Yverdon-les-Bains – Switzerland Tel: +41 24 445 21 21 – Fax: +41 24 445 21 23 – Email: [email protected] – www.jdc.ch

Open the catalog to page 1

MagnetTrans

MagnetTrans

Catalog excerpts

All JDC Electronic catalogs and brochures