TORQUE LIMITING COUPLINGS
26Pages

TORQUE LIMITING COUPLINGS

quality products for mechanical & fluid power: USP: Analyse industry applications & provide proficient solutions to the mechanical power transmission and hydraulics industries. PRODUCT SPECIFICATION: team of design engineers to assist in design process, simple or complex, standard or bespoke. PROMPT PRODUCT SUPPLY: large stocks for next day delivery on many items. MACHINE SHOP: full machining services for bespoke designs and prompt turnaround. BELLHOUSINGS / COUPLINGS » bellhousings » wet mount bellhousing (NEW) » spider couplings » gear couplings » all steel gear couplings (ATEX) » 'JXL'...

Torque Limiting Couplings Sliding Hubs and Safety Clutches, Series DA

Torque Limiting Couplings DELTA Torque Limiter Series DA » Torque Limiters up to 23.000 Nm. » Standard version galvanized and yellow cromatized. » Limitation of torque prevents high shock loads. » Adjustable torque settings. » Friction discs free of asbestos. » Standard bushing for extended durability. » Change of torque settings, even if assembled. » Rust and acid resistant version available on request. » Special version with needle bearing available on request. Parts of the DELTA Torque Limiter Series DA Friction disc Centre sliding bush Disc spring Pressure ring Safety plate Adjustment...

Torque Limiting Couplings DELTA Torque Limiter Series DA Disc Spring Layers For torque limiters three different layers of disc springs are possible. a) Disc springs in single layer for torque limiters DA 00 to DA 8 b) Disc springs in two layers for torque limiters DA 00 to DA 8 c) Disc springs in three layers for torque limiters DA 1 to DA 5 If case c) is used, the width of the driving part is reduced and it should only be used when the dimensions of the construction are limited. Special adjustment unit is necessary. Special adjustment nuts The DELTA DA torque limiter 0 to 5 requires in the...

Torque Limiting Couplings DELTA Torque Limiter Series DA dimensions * Dimension d1, produced for bore H8. ** Only to be used when design has limited dimensions. Order example:

DELTA Series DA with Sprocket - *ELT^ DELTA Size * The width of the driving part is reduced.

» Sprockets for roller chains DIN 8187 ISO R606B, sprockets for roller chains DIN 8188 on request. » When using double or triple sprockets the smallest number of teeth should be chosen 1 to 2 teeth larger. » Number of teeth marked with x have to be turned down evenly on both sides or have to be turned out (see also width of torque limiter). Note: When installing the sprocket the bushing has to be fitted. Length of bushing = sprocket + 1,5 x thickness of friction disc (see also torque limiters) Material of sprockets: C45 or other hardened steels. Hardness of teeth surface HRC 56 ± 2

DELTA DA MAX. » Torque Limiter designed for wide drive parts in long version. » Suitable for double and triple sprockets, timing belt pulley, V-belt pulley. » Available as package unit with sprocket, V-belt, and timing belt pulley. DELTA DA max . assembled with double sprocket as package available.

For details of SPIDEX® couplings, including permitted values for axial, radial and angular deviations, see yellow, Pump Drive Components catalogue, pages 4 to 10: www.jbj.co.uk/PDF/PumpDriveComponents.html DELTA DA with Spidex® Coupling » Torque Limiter for protection against overload between two shafts. » Torsionally flexible torque limiter with allowance for axial displacement. » Elements available in different shore hardnesses.

For details of DENTEX® gear coupling, including permitted values for axial, radial and angular deviations, see yellow, Pump Drive Components catalogue, pages 26 to 32: DELTA DA with Dentex® Coupling » Torsionally rigid torque limiting shaft to shaft coupling. » Large axial, radial and angle flexibility due to double universal joints. » Axially assemble.

Torque Limiting Couplings DELTA Series DA with Chain Coupling RKC DELTA DA RKC Torque Limiter couplings are strong and uncomplicated overload protections for the connection of two shafts. They consist of a normal torque limiter with sprocket built in and an additional sprocket with hub. The two sprockets are connected with a double roller chain type DIN 8187 ISO R606B, tight but slightly elastic. The two ends of the chain are connected with a connecting link. DELTA DA RKC Torque Limiters are used as overload protection when a small parallel or angle deviation of the connecting shafts cannot...

Torque Limiting Couplings DELTA Series DA with LF Coupling (highly elastic) Details of LF torsional couplings can be found in the Torsional Couplings catalogue at: www.jbj.co.uk/PDF/TorsionalCouplings.html DELTA DA with LF Torsional Coupling DELFLEX Torque Limiter couplings series DA are highly elastic safety couplings with stepless adjustable torque for the connection of two shafts. The especially formed rubber element of the elastic coupling has a large capability of deflection, does act against vibration torque and absorbs shocks.

DELTA Series DB with DB-RKC - iELT^

DELTA Series DB Torque Limiter - *ELT^ §• Torque Limiters up to 1.360 Nm. > • Standard version galvanized and yellow cromatized. • Limitation of torque prevents high shock loads. • • Friction discs free of asbestos. • Standard bushing for extended durability. * The calculation of the length of the bushing is as followed: length of bushing = 1,5 x si + b1 * Feather keyway according to DIN 6885-3 Friction Friction facing facing Disc spring Hex adjustment nut Bolt adjustment nut Pilot Adjustment plate bolt Hub Bushing Pressure Lock plate washer

Torque Limiting Couplings DELTA Series DB with Sprocket Feather keyway according to DIN 6885-3

Torque Limiting Couplings Selection of Sprocket Wheels » Sprockets for roller chains DIN 8187 ISO R606B, Sprockets for roller chains DIN 8188 on request. » When using double or triple sprockets the smallest number of teeth should be chosen 1 to 2 teeth larger. » Number of teeth marked with x have to be turned down evenly on both sides or have to be turned out (see also width of torque limiter) Attention: When installing sprocket the bushing has to be fitted. Length of bushing = sprocket + 1.5 x thickness of friction disc (see also torque limiters) Material of sprockets: C45 or other...