RAI 300 Series

RAI 300 Series

RAI 300 Series

Product catalog summary
Overview
The Jastram Series 300 Rudder Angle Indicator (RAI) System provides continuous and accurate indication of a vessel's rudder position. It requires a feedback unit and at least one rudder angle indicator, with the capability to support up to five indicators.
Main Components
  • Rudder Angle Indicator: Features a 75mm face diameter, IP56 rating, reverse polarity protection, backlight for visibility, and gain adjustment for synchronization. It supports indication up to 50 degrees port and starboard and is constructed with anodized housings for durability.
  • Rudder Feedback Unit: Comes with high-impact, waterproof housings, plug-in connectors for easy wiring, and internal gain adjustment. It is resistant to heavy vibration and can provide signals to an autopilot. It requires mechanical linkage to the rudder stock and includes corrosion-resistant components.
Specifications
  • Supply Voltage: 12, 24, 36 VDC
  • Indicator Response Time: Up to 5 seconds
  • Signal Inputs: 400 ohms movement, 0 volts at 0 degrees, ±1 mA / 50 degrees
  • Cable: 18 AWG, 4 wire, shielded
Optional Features
  • Backlight Dimmer
  • Reverse Scale Indicators for aft stations
  • Flushmount Bezel and Bulkhead Mount Waterproof Housing for external installations
  • Rudder Stock Clamp
Rudder Feedback Models
  • RFU 400: Commercial potentiometer and driver board
  • RFU 1300: Hall effect device, driver board, and limit switches
  • RFU 2000: Commercial potentiometer, driver board, and limit switches
Contact Information
Jastram Engineering Ltd., 135 West Riverside Drive, North Vancouver BC, Canada V7H 1T6. Phone: 604 988 1111, Fax: 604 986 0334, Email: [email protected], Website: www.Jastram.com
See more

Catalog excerpts

RAI 300 Series-1

Photo courtesy of All American Marine Jastram Rudder Angle Indicators Know your rudder angle at all times! The Jastram Series 300 Rudder Angle Indicator System provides continuous, accurate indication of your rudder's position. Every Jastram RAI system requires a feedback unit and at least one rudder angle indicator. In a system up to five indicators can be used with a mixture of forward and reverse scale meters. The 2 main components in a Jastram RAI system are: 1. Rudder Angle Indicator 2. Rudder Feedback Unit

 Open the catalog to page 1
RAI 300 Series-2

Rudder Feedback Unit • 75mm (3in) face diameter • The Series 300 are IP 56 to the face • Indicator readings are not affected by low or uctuating supply voltage • Reverse polarity protected • Backlight for increased visibility of the scale • Optional Backlight Dimmer available • Each indicator has a gain adjustment for easy synchronization • Reverse scale indicators are available for aft facing stations • Indication up to 50 degrees port and starboard • A high quality construction, anodized housings • Fast Response time; up to 5 second rudder speeds • High-impact, waterproof housings • Fitted...

 Open the catalog to page 2

Archived catalogs

  1. Catalogue

    47  Pages

  2. Brochure

    28  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.