Right to modifications without prior notice T e c h n i c a l s p e c i f i c a t i o n s - E D I T ION OC T O B E R 2 012 I TA LI A 13.9 8 Model: Italia 13.98 Project: Maurizio Cossutti Yacht Design and Italia Yachts Design Team Builder: Italia Yachts - Venezia CE Certification: The boat is built according to the european Certification of compliance CE for pleasure craft “A” category. Property and management: Italia Yachts - Venezia Dime ns ion s AN D T E C H NIC AL S PE C IFIC AT IONS Lenght over all: mt. 14,40 (46,92 ft) Hull lenght: mt. 13,98 (45,87 ft) Waterline lenght: mt. 12,46 (40,88 ft) Beam max: mt. 4.30 (14,1 ft) Draft: mt. 2,50 (7,87 ft) Displacement: 9.200 kg Tanks: Fuel Tank: n° 1 x 240 lt c.a Water Tanks: n° 2 x 240 lt (tot. 480 lt c.a) Engine: Diesel Yanmar 55 Hp (optional 75 Hp) Transmission: Sail Drive Engine Battery: n°1 x AGM 55Ah Services Battery: n°2 x AGM 120Ah (third battery op. AGM 120Ah) Sail area Mainsail + jib: 124 mq (1.345 sq ft) Mainsail + gennaker: 226 mq (2.432 sq ft) D oc ume n tation - CE certificate - Certificate of Compliance - Certificate of power of engine - Owner’s manual containing a description of the boat and of systems installed on board. Italia Yachts Venezia Via Maestri del Lavoro, 50 30015 Chioggia (Venezia) Italy tel +39 041 4967891 / fax +39 041 5543923 [email protected] www.italiayachts.it

Right to modifications without prior notice C ons t r u ction Hull and deck are laminated in sandwich with differentiated density PVC core; the unidirectional and biaxial E-glass fibres are laminated with vinylester resin. The lamination is carried out at controlled temperature between 16 and 25°. Plates are included in the structure to increase resistance where the deck hardware is mounted. The collar of the mast is structural. There is a structural carbon reinforced frame glued and laminated to the hull bottom. The structural bulkheads of Italia 13.98 are made of marine plywood 15mm to 25mm...

RUNNING R IGGING Mainsheet system There is a reverse “T” system for the main sail adjustment with recessed track and traveller, including ball bearing blocks. Jib trim system Jib tracks are 1,40 mt. long with ball bearings system and 1:5 purchase. Backstay system Dyneema back stay with hydraulic adjustment. Right to modifications without prior notice Mast collar Provided: - n° 6 blocks - n° 2 deck organizer - n° 8 stopper Padeyes The following standard padeyes are provided, foldable and fixed: - n° 2 padeyes for gennaker sheet - n° 2 vang padeye - n° 1 padeye for gennaker tack - n° 2 padeyes...

Inte r ior s All interiors and bulkheads are veneered in teak with satin varnish. Galley The “L” galley including cupboards and drawers has a three burner tilting stove, a refrigerator of about 150 lt capacity with accumulator plate and separated compressor, n° 2 stainless steel sinks with hot and cold water mixer. It is possible to install a second frontal opening refrigerator (optional). Dinette The saloon consists of an “U” sofa (240 cm) and a table (110 cm x 80), a sliding pouf that offers 2 more seats; on the opposite side there is another sofa (150 cm). There are also large storage spaces...