Right to modifications without prior notice T e c h n i c a l s p e c i f i c a t i o n s - E D I T ION OC T O B E R 2 012 I TA LI A 10.9 8 Model: Italia 10.98 Project: Maurizio Cossutti Yacht Design e Italia Yachts Design Team Builder: Italia Yachts - Venezia CE Certification: The boat is built according to the European Certification of compliance CE for pleasure craft “A” category Property and management: Italia Yachts - Venezia Dime ns ion s AN D T E C H NIC AL S PE C IFIC AT IONS Length over all: mt 11,29 (37,04 ft) Hull length: mt 10,98 (36,02 ft) Waterline length: mt 9,65 (31,66 ft) Beam max: mt 3,65 (11,97 ft) Draft: mt 1,90 (6,23 ft) Displacement: Kg 4.500 ca Ballast: Kg 1.500 ca Tanks: Gasolio n° 1 x 240 lt c.a Water Tanks: n° 2 x 240 lt (tot. 480 lt c.a) Engine: Diesel Lombardini 20Hp (Lombardini engine 30 hp optional) Transmission: Sail Drive Engine Battery: n°1 x AGM 55 AH Services battery: n°1 x AGM 130 AH (second opt. battery 130AH) Sail area Mainsail + jib: 72 mq (775 sq ft) Mainsail + gennaker: 135 mq (1,453 sq ft) Doc ume n tation - CE certificate - Certificate of Compliance - Certificate of power of engine - Owner’s manual containing a description of the boat and of systems installed on board. Italia Yachts Venezia Via Maestri del Lavoro, 50 30015 Chioggia (Venezia) Italy tel +39 041 4967891 / fax +39 041 5543923 [email protected] www.italiayachts.it

C ons t r u ction Hull and deck are constructed in sandwich with differentiated density PVC core; the unidirectional and biaxial E-glass fibres are laminated with vinylester resin. The lamination is carried out at controlled temperature between 16 and 25°. Plates are included in the structure to increase resistance where the deck hardware is mounted. The collar of the mast is structural. There is a structural carbon reinforced frame glued and laminated to the hull bottom. The structural bulkheads of Italia 10.98 are made of marine plywood 15mm to 20mm thick and are glued and gusseted to the hull...

RUNNING R IGGING Mainsheet system “German” sheet below deck. The sheet is operated by dedicated winches including n° ball bearing blocks Ronstan or similar. Jib tracks Jib tracks are 1,00 mt. long, with ball bearing traveller and 1:5 purchase by Ronstan or similar. It is possible to install on option the barber hauler system under deck. Backstay system Dyneema® backstay with purchase system 24:1 Right to modifications without prior notice Mast collar Provided: - n° 6 blocks - n° 2 deck organizers - n° 8 stoppers Padeyes The following standard padeyes are provided, foldable and fixed: - n° 2 padeyes...

Inte r ior s All interiors and bulkheads are veneered in teak with satin varnish. Galley The “L” galley including cupboards and drawers, has a two burner tilting, refrigerator with compressor and two stainless steel sinks. Dinette The saloon consists of two long sofas (196 cm) and a foldable table (115 x 126) with bottle compartment. Large storage space and cabinets at sides are provided. Two additional beds can be obtained by removing the backrests to sofas. Chart table There is a wide chart table with seat, drawers and storage for navigation equipment. Right to modifications without prior notice...