*mynauticexpo

Catalogs
ISOLTEMA GROUP
Stratos ARS 3.1 TMP

Stratos ARS 3.1 TMP

Product catalog summary

Description: Stratos ARS 3.1 TMP is a hot-poured sealing compound composed of synthetic rubber, bitumen, and adhesive agents. It is specifically designed for use in joints of bridge abutments.

Uses: The compound is ideal for filling deep and broad joints in bridge abutments and is also suitable for sealing reinstatements after pipeline and cable laying.

Properties: The product exhibits true elastic properties, good rigidity, and does not run at high temperatures. It is compatible with salts and alkalis and operates effectively within a service temperature range of -30°C to +60°C.

Preparation of the Support: Joints must be clean, dry, and free from dirt. Any residual humidity should be eliminated using a high-temperature thermal nozzle. For dusty surfaces, an Isoltema bituminous primer should be applied.

Melting and Applying Compound: Melting should be conducted in an oil bath smelter with stirring and temperature control. The pouring temperature is approximately 160°C, with a critical temperature of 180°C for up to 2 hours. The temperature in the melter should be maintained between 150°C and 170°C for a maximum of 6 to 8 hours.

Storage: The product has an unlimited shelf life and requires no special storage precautions.

Dimensions and Packaging: Stratos ARS 3.1 TMP is available in cardboard cartons weighing approximately 20 to 25 kg.

Technical Data: Key characteristics include a softening point of 105-115°C, cone penetration at 25°C of 15-20 dmm, and elastic recovery of 85-95%. The product's hardness is measured by ASTM D 2240 with an index of 50-60.

Catalog excerpts

Hot-Poured Rubber-Bitumen Mastic for Joints of Abutments of Bridges Description Stratos ARS 3.1 TMP is a hot poured sealing compound made from a mixture of synthetic rubber, bitumen and adhesive agents.

Open the catalog to page 1

Technical data CHARACTERISTICS Softening point Heat stability / penetration at 25°C Heat stability / Penetration and recovery at 25°C Heat stability at 60°C for 5 h angle 75° Elastic recovery Hot poured bituminous sealing mastic Stratos ARS 3.1 TMP Uses Stratos ARS 3.1 TMP is ideal for the filling of deep and broad joints of abutments of bridges. The mastics is also used for sealing of reinstatements, following pipeline and cable laying. Properties True elastic properties; Good rigidity; Does not run at high temperatures; Compatible with salts and alkalis; Service Temperature: -30°C / +60°C....

Open the catalog to page 2

Stratos ARS 3.1 TMP

Stratos ARS 3.1 TMP

Catalog excerpts

All ISOLTEMA GROUP catalogs and brochures