*mynauticexpo

Catalogs
ISOLTEMA GROUP
Stratos ARS 3.0 ROAD FLEX

Stratos ARS 3.0 ROAD FLEX

Product catalog summary

Product Overview
Stratos ARS 3.0 ROAD FLEX is a hot poured sealing compound composed of synthetic rubber, bitumen, and adhesive agents. It is designed for sealing cracks and joints in road surfaces to prevent water infiltration and reduce structural deformations.

Uses
The product is used for filling horizontal joints between concrete slabs or hydrocarbon surfaces, such as road expansion joints and industrial flooring, as well as cracks in concrete or hydrocarbon surfaces.

Properties

True elastic properties
Good rigidity
Does not run at high temperatures (up to +/-60°C)

Preparation of the Support
The joint or crack must be clean, dry, and free from dirt. Residual humidity should be eliminated using a high-temperature thermal nozzle. For dusty surfaces, apply Isoltema bituminous primer.

Melting and Application

Melting is done in an oil bath smelter with stirring and temperature control.
Pouring temperature: +/- 160°C
Critical temperature: max 180°C for 2 hours
Temperature maintained in melter: 150/170 °C
Maximum time with maintained temperature: 6/8 hours

Consumption
Consumption varies with joint/crack section. For a section of 1 cm², 180 grams per running meter is required.

Technical Characteristics

Softening point: > 110 °C
Cone penetration at 25°C: > 35 dmm
Heat stability/penetration at 25°C: > 30 dmm
Heat stability/penetration and recovery at 25°C: > 50%
Heat stability at 60°C for 5 hours angle 75°: < 2 mm
Elastic recovery: 90%
Hardness: 60 index

Storage and Packaging
The product has unlimited storage with no particular precautions required. It is available in cardboard cartons of approximately 20/25 Kg.

Additional Information
For further details, refer to the Safety Data Sheet. Product characteristics may change without prior notice.

Catalog excerpts

Stratos ARS 3.0 ROAD FLEX Hot-Poured Rubber-Bitumen Mastic Sealing cracks and joints represents one of the most effective preventive maintenance jobs on road surfaces: stops water seeping into the non-bondend layers of the road structure, effectively avoids or reduces localised subsidence, elevation and deformations due to ice and thaw, pumping effect, etc.. The Product Stratos ARS 3.0 ROAD FLEX is a hot poured sealing compound made from a mixture of synthetic rubber, bitumen and adhesive agents.

Open the catalog to page 1

Technical data ROAD FLEX Softening point Heat stability / penetration at 25°C Heat stability / Penetration and recovery at 25°C Heat stability at 60°C for 5 h angle 75° Elastic recovery Hardness Uses Filling horizontal joints between concrete slabs or hydrocarbon surfaces (road expansion joints and industrial flooring, joints between metallic structures and concrete). Filling cracks in concrete or hydrocarbon surfaces. Properties Storage Unlimited. No particular precautions are required. Packaging Stratos ARS 3.0 ROAD FLEX is available in cardboard cartons of ~ 20/25 Kg. True elastic properties;...

Open the catalog to page 2

Stratos ARS 3.0 ROAD FLEX

Stratos ARS 3.0 ROAD FLEX

Catalog excerpts

All ISOLTEMA GROUP catalogs and brochures