*mynauticexpo

Catalogs
ISOLTEMA GROUP
Stratos ARS 1.0

Stratos ARS 1.0

Product catalog summary

Uses
The Stratos ARS 1.0 Strip is used as a connecting piece between different road surface elements, such as between bituminous mix and concrete elements, and between bituminous mix surfaces and functional elements like sumps and gratings. It is designed to create a flexible, watertight seal that accommodates movement from cyclic loads and thermal changes, preventing cracking and erosion.

Product Description
Stratos ARS 1.0 is an elasto-plastic jointing strip made of bitumen modified with SBR type thermoplastic elastomers. It is extruded, preformed, self-adhesive, cold applied, and ready for use. The strip includes a root/weed killer to prevent plant growth.

Technical Characteristics

Thickness: 10 mm
Softening Point: > 120°C
Density at 25°C: 1.3 ± 5% Kg/dm3
Cone Penetration at 25°C: 22 ± 2 0.1mm
Resilience at 25°C: 6 ± 2 0.1mm
Flow Resistance at 60°C: 0 mm
Adhesion to Concrete: 76.2 ± 5.5 N/cm2
Plasticity/Impact Strength: 75% ± 5%
Hardness (shore A): 70

Preparation and Installation Procedures
Installation requires smooth, dry, grease-free surfaces. The strip is bonded between the vertical faces of the joint. Existing asphalt or concrete structures should be cut to provide a clean edge. The strip must be fitted vertically and should be about 10 mm higher than the upper surface of the layer to be installed. Secure the strip by pressing firmly, and if the temperature is below 15°C, heat the substrate to improve adhesion.

Storage and Shelf Life
The product should be stored in a dry, covered place at temperatures between +5°C and +40°C. It is best used within 12 months, although it is not affected by frost.

Dimensions and Packaging
Standard length is 10 meters, with thickness of 10 mm and widths ranging from 30 mm to 60 mm. Other dimensions are available on request. Each box contains 2 rolls.

Catalog excerpts

Prefabricated, Self-Adhesive, Cold Applied Bitumen-Polymer Strip When different types of road structure meet, a flexible joint must be created between the structures. The Stratos ARS 1.0 forms a flexible watertight seal accomodating slight movement from cyclic loads The Product Stratos ARS 1.0 is an elasto-plastic jointing strip made of bitumen modified with “SBR” type thermoplastic elastomers, extruded, preformed and industrially prefabricated, self-adhesive, cold applied, ready for use. and thermal changes thus preventing cracking and subsequent erosion of the joint by weathering. On request it can be added with biocides to prevent vegetative growth. Uses The Stratos ARS 1.0 Strip can be used as a: Connecting piece between the different elements the edges of which form discontinuity of the road surface: - between the bituminous mix and the concrete element

Open the catalog to page 1

Technical data CHARACTERISTICS Softening Point CHARACTERISTICS Flow Resistance at 60°C Adhesion to Concrete Plasticity/Impact Stength - between the bituminous mix surface and the borders of functional elements such as sumps and gratings. Connecting and sealing joints during installation of the bituminous mix road surface. Description Stratos ARS 1.0 is a strip in modified bitumen, industrially preformed, designed and developped to ensure maximum union, adhesion and elasticity between discretely connected road surface elements-bituminous mixes, concrete, steel-allowing expansions and settling,...

Open the catalog to page 2

Stratos ARS 1.0

Stratos ARS 1.0

Catalog excerpts

All ISOLTEMA GROUP catalogs and brochures